Robust DataComm rdc485ih-dv-4p-cc Hub/Converter Guide De Spécification
Model: rdc485ih
(Previously known as rdc485hub)
Isolated Intelligent Hub, RS-232 to Dual RS-485
The rdc485ih allows connection of one RS-232 and two RS485
devices complete with full 4-port 2.5kv optical/galvanic isolation -
including 3 isolated DC supplies. Each port is fully isolated (with
floating ground) with reference to the other data ports and the
power supply.
devices complete with full 4-port 2.5kv optical/galvanic isolation -
including 3 isolated DC supplies. Each port is fully isolated (with
floating ground) with reference to the other data ports and the
power supply.
In a Master/Slave configuration (Mode 1), any data received on
port C ("Master") is echoed out from both ports A and B
("Slaves"). In a hub configuration (Mode 2), any port can freely
talk to the other two. Any data received on any port is echoed
out the other two. Data received on either port A or B is only
echoed to port C ("Master"). In Switch mode, only port B is
allowed to talk to port C. When the external terminal (SWITCH) is
pulled to ground, only port A is allowed to talk to port C.
port C ("Master") is echoed out from both ports A and B
("Slaves"). In a hub configuration (Mode 2), any port can freely
talk to the other two. Any data received on any port is echoed
out the other two. Data received on either port A or B is only
echoed to port C ("Master"). In Switch mode, only port B is
allowed to talk to port C. When the external terminal (SWITCH) is
pulled to ground, only port A is allowed to talk to port C.
The RS-485 ports can be field set for 2 or 4-wire (default)
operation and includes options for line biasing and a 120-ohm
internal termination. 500-watt voltage transient suppressor
diodes protect the rdc485ih from normal mode surges, while full
galvanic isolation protects the unit from common mode surges.
operation and includes options for line biasing and a 120-ohm
internal termination. 500-watt voltage transient suppressor
diodes protect the rdc485ih from normal mode surges, while full
galvanic isolation protects the unit from common mode surges.
Isolation, industrial design, small size, DIN rail mount, user
indication, and DC supply make the rdc485ih a very engineer-
friendly device for your industrial data communication system.
indication, and DC supply make the rdc485ih a very engineer-
friendly device for your industrial data communication system.
RS-232/485 port Description:
Port Type ............................... EIA/RS-232 EIA/RS-485
Voltage Levels ....................... ±9v DC -7 to +12v DC
Permitted Surge ..................... ±25v DC ±25v DC
Surge Diodes Installed .......... ±15v, 500-watt ±15v, 500-watt
Voltage Levels ....................... ±9v DC -7 to +12v DC
Permitted Surge ..................... ±25v DC ±25v DC
Surge Diodes Installed .......... ±15v, 500-watt ±15v, 500-watt
Isolation (ISO/IEC 9549):
RS-232 to RS-485 to RS-485 ...... 2500v (optical, 5kV test)
Power to RS-485 Port A ........ 2500v (galvanic, 3kV test)
Power to RS-485 Port B ........ 2500v (galvanic, 3kV test)
Power to RS-232 Port C ........ 2500v (galvanic, 3kV test)
Conformal Coating ................. (optional) 5000v spec
Power to RS-485 Port A ........ 2500v (galvanic, 3kV test)
Power to RS-485 Port B ........ 2500v (galvanic, 3kV test)
Power to RS-232 Port C ........ 2500v (galvanic, 3kV test)
Conformal Coating ................. (optional) 5000v spec
Power Supply Options:
9v to 36v DC (1.5watt max).... 12v or 24v including batteries
48v DC +/- 20% (38-58v)........ 48v for telecom & transportation
5v DC +/- 5% (4.75-5.25v)...... 5v for OEM integration
User Indication ....................... Green LED for power status
48v DC +/- 20% (38-58v)........ 48v for telecom & transportation
5v DC +/- 5% (4.75-5.25v)...... 5v for OEM integration
User Indication ....................... Green LED for power status
Communication:
Max Speed ............................ 115kbps , no config required
Character Setting ................... Transparent, no config required
Duplex / Direction .................. Automatic, no RTS/CTS required
User Indication ....................... Yellow LED for each Receive
Character Setting ................... Transparent, no config required
Duplex / Direction .................. Automatic, no RTS/CTS required
User Indication ....................... Yellow LED for each Receive
Signal Red “Break’ LED for each
RS-485
Maximum Bus Length ............ 1000m per EIA-48515m per EIA-
232
232
Environmental:
Ambient operating temperature: -20C to + 65C
Ambient storage temperature: -40C to +100C
Relative Humidity....................10 to 95% RH, non condensing
Casing; good fungus & termite resistance; self-extinguishing.
Weight ................................... 130g.
Terminal Capacity .................. 2.5mm strand (12 AWG)
4.0mm
Ambient storage temperature: -40C to +100C
Relative Humidity....................10 to 95% RH, non condensing
Casing; good fungus & termite resistance; self-extinguishing.
Weight ................................... 130g.
Terminal Capacity .................. 2.5mm strand (12 AWG)
4.0mm
solid
(12
AWG).
Mounting Rail ......................... DIN EN 50022 (35mm
symmetrical)
symmetrical)
DIN EN 50025 (32mm asymmetrical)
(Note: Style DIN 50022 works best)
(Note: Style DIN 50022 works best)
Copyright 2007 © Robust DataComm Pte Ltd
(Version 1.0) Specifications subject to change without notice
Block Diagram
Application Details:
Master/Slave (Default) mode : One RS-232 Host has 2 RS-485
network (can be multi-dropped)
network (can be multi-dropped)
Hub mode : Two RS-485 Hosts share single RS-232 Slave (only
ONE host can talk to slave at one time – rdc485ih does NOT
arbitrate)
Switch mode : If there is a risk of 2 hosts talking simultaneously,
Switch mode can be used to only allow one of them to talk to the
slave.
ONE host can talk to slave at one time – rdc485ih does NOT
arbitrate)
Switch mode : If there is a risk of 2 hosts talking simultaneously,
Switch mode can be used to only allow one of them to talk to the
slave.
Order Information:
rdc485ih
Input Power Supply (Select One)
dv
9 to 36vDC, 1.5 watt (63mA@24v)
hv
48vDC +/- 20% 1.5 watt
5v
5vDC +/- 5% (260mA max)
Ground Isolation (No Option)
4p
Full 4-of-4 Ground Isolation
Connectors (Select One)
cd
RS-232 = DB9, RS-485 Terminals
dd
All 9-pin D-Shell
Other Options (none required)
fc Conformal Coating (+5000v)
Example: model rdc485ih-dv-4p-cd is an “Isolated Intelligent Hub,
1 x RS-232, 2 x RS-485 Ports, DIN-Rail Mount, 9-36vDC Supply,
Full 4-of-4 Ground Isolation, 9-pin D-Shell for RS232 port,
removable screw terminals for RS485 ports.”
1 x RS-232, 2 x RS-485 Ports, DIN-Rail Mount, 9-36vDC Supply,
Full 4-of-4 Ground Isolation, 9-pin D-Shell for RS232 port,
removable screw terminals for RS485 ports.”
Mechanical Dimensions: mm (inches)
Mode 1
Mode 2
Logic
Unit
ih
ih