Weed Instrument 2M23 Output Module Guide De Spécification

Connect the DIN Rail, via the Model 2A09 End
Clamp, to protective earth ground with low
impedance.  The modules are grounded to PE
when they are snapped onto the DIN Rail.  A
Model 2A09 End Clamp on each side of the
module bundle on the DIN rail prevents
accidental disconnection of the modules’
interconnection bus.

Phone:

800-880-9333
512-434-2850

Fax:

512-434-2851

Email:

fiberop@weedinstrument.com

Visit:

www.weedinstrument.com

Important Notice - Before utilizing the product, the user should
determine the suitability of the product for its intended use.  The
user assumes all risk and liability in connection with such use.
WEED INSTRUMENT'S WRITTEN WARRANTY FOR THE
PRODUCT IS MADE IN LIEU OF ALL OTHER WARRANTIES,
EXPRESSED OR IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE.  The user's exclusive remedy for breach of Weed
Instrument's written warranty shall be the repair or replacement
of such quantity of product which is proven to be defective.  In no
case shall Weed Instrument be liable for any special, incidental,
or consequential damages based upon breach of contract,
negligence, strict liability or other legal theory.

Publication Number:

RM0900176  Rev. 9/04

Weed Instrument

Fiber Optics

EOTec 2000 MUX Model

Dual Channel,

Contact Closure Relay Output

Power Requirements

9VDC @ 200mA via
the interconnection Bus
from a 2A06 or 2A16
power supply or the
MUX Base Module
(2M55, 2M57, 2M59 or
2M61)

Connections

Pluggable, Cage Clamp
Screw Terminal Blocks,
Accept 12 to 24 AWG

Update Rate

57.6KHz, independent
of number of
modules/channels
utilized

Output Relay

Form-C (SPDT)

Output Contact Rating 220VDC, 250VAC,

2A Continuous,
2A Switching

Ambient Conditions

-40 to 85°C
0 to 95% Humidity
(Non-condensing)

Mounting

35mm DIN Rail

Weight

< 9oz

Flammability Rating

UL V-0