Cisco 2811 ROUTER 2FE 1NME 4HWIC 2PVDM 2AIM IP BASE WITH A/C POWER SUPPLY Guide De Spécification
50
Installing and Upgrading Internal Modules in Cisco 2800 Series Routers
OL-5792-04
Replacing the Power Supply
Figure 50
Connecting an ILP Cable in Cisco 2821 and Cisco 2851 Routers
.
Step 6
Install the bezel onto the front of the chassis as follows:
a.
Engage the plastic tabs of the bezel into the slots in the chassis.
b.
Slide the bezel until it is centered and tight against the chassis.
Step 7
If you are finished installing modules, install the cover on the router. See the
1
ILP cable connector, motherboard
3
ILP cable guides
2
ILP cable connector, power supply
1
3
3
3
3
3
127115
2