Cisco CATALYST 6509E 9 SLOT 15U CHASSIS NO POWER SUPPLY NO FAN TRAY Guide De Spécification

Power Supply

Supports one or two power supplies. The following power supplies are 
supported:

WS-CAC-1000W (1000 W AC-input power supply).

WS-CAC-1300W (1300 W AC-input power supply).

WS-CDC-1300W (1300 W DC-input power supply).

WS-CAC-2500W (2500 W AC-input power supply).

WS-CDC-2500W (2500 W DC-input power supply).

WS-CAC-3000W (3000 W AC-input power supply).

WS-CAC-4000W-US (4000 W AC-input power supply).

WS-CAC-4000W-INT (4000 W AC-input power supply).

PWR-4000-DC (4000 W DC-input power supply).

WS-CAC-6000W (6000 W AC-input power supply)

1

.

Installed power supplies can be of different wattage ratings. Installed 
power supplies can also be both AC-input, both DC-input, or one 
AC-input and one DC-input. Power supplies can be configured in either 
redundant or non-redundant mode.

All Catalyst 6500 series AC-input power supplies require single-phase 
source AC. Source AC can be out of phase between multiple power 
supplies or multiple AC-power plugs on the same power supply because 
all AC power supply inputs are isolated.

Single power supplies are installed in the left power supply bay. The 
second power supply is installed in the right power supply bay.

You must install a 2500 W or higher capacity power supply when using 
the Supervisor Engine 32 or the Supervisor Engine 720 and the 
high-speed fan tray.

1.

When installed in a Catalyst 6506 switch chassis, the 6000 W power supply has a maximum output of 4000 W.