KTI Networks KCD-3PB Fascicule
110428
Specifications:
Industrial 10/100Base-TX to
100Base-FX Media Converter
The industrial KCD-300 media converter series provides industrial strength Ethernet copper-to-fiber
media conversion, allowing for 10Base-T-100Base-FX or 100Base-TX-100Base-FX over multi-mode
or optional single-mode fiber optical media.
Benefits:
Comprehensive configuration settings to increase flexibility for application needs
Wide operating temperature range for temperature critical environment
Support DIN rail mounting and panel mounting
Provide two power input types to meet more application needs
Accept wide power input voltage range for application flexibility
Industrial-rated Emission and Immunity performance
Key Features:
Support full wire speed conversion for 10/100 speed and media types
Support auto-negotiation 10/100Mbps or forced mode on TP copper port
Auto MDI/MDI-X crossover function on the TP copper port
Provide Link Fault Pass Through function
Provide comprehensive manual configuration settings
Transparent conversion to 802.1Q VLAN tagged packets
Provides Far End Fault function on FX (fiber) port
Low power consumption
Two power interface types: screw terminal block and DC Jack
Supports wide power input voltage range
Supports DIN rail mounting and optional screwed plane mounting
Supports wide operating temperature range
Industrial-rated Emission and Immunity performance
Conversion
10BASE-T to 100BASE-FX, 100BASE-TX to 100BASE-FX
Conversion Methods Smart-forward mode:
- Store-and-forward for 10M to 100M
- Direct conversion for 100M to 100M
Store-and-forward always mode
Packet Types
Transparent conversion with no modification to:
- Standard IEEE 802.3 Ethernet packet frames
- IEEE 802.1Q tagged packet frames
TP Port
Shielded RJ-45 jack
Auto MDI/MDI-X crossover function
Auto-negotiation function for speed and duplex mode
Full-duplex and Half-duplex support
10Mbps - Supports Cat. 3,4,5 UTP cable up to 100m
100Mbps - Supports Cat. 5 UTP cable up to 100m
Fiber (FX) Port
Multimode ST, SC, Single mode SC,
100Mbps Full-duplex and Half-duplex support
MIFF 50/125µm, 62.5/125µm fiber cable
KCD-300
Panel Mounting Bracket
C03-4002-101 (KCD-3PB)
C03-4002-101 (KCD-3PB)
EMI EMS Safety Environmental Tests:
Specifications
Class B
Class B
< 75 W
Clause 5
+/-8KV
Power: +/-4KV
Data: +/-2KV
Level 3
50Hz 40A/m
Interruption: C
Dips: A
Strength: 10V/m
TP, 1500VAC/60sec.
TP, 500VDC/10Mohm
-20
O
C, 96hrs
+70
O
C 40%RH 96hrs
+60
O
C 90%RH 96hrs
Test
FCC/EMI
CE/EMC/EMI
CE/EMC/Harmonic
CE/EMC/VFF
CE/EMC/EMS
ESD Test
RS Test
EFT/BURST
Surge Immunity
CS Test
Magnetic Field Imm.
Voltage Dips Imm.
Safety
Dielectric Voltage
Insulation Resistance
Cold Test
Dry Heat Test
Damp Heat Test
Storage Test
Vibration Test
Standard
FCC Rule Part 15
EN55022, CISPR 22
EN 61000-3-2
EN 61000-3-3
EN 55024
IEC 61000-4-2
IEC 61000-4-3
IEC 61000-4-4
IEC 61000-4-5
IEC 61000-4-6
IEC 61000-4-8
IEC 61000-4-11
EN 60950, IEC 60950
IEEE 802.3
IEEE 802.3
IEC 68-2-1 Test Ad
IEC 68-2-2 Test Bd
IEC 68-2-3
IEC 68-2-48
IEC 68-2-34
+85
O
C 40%RH 96hrs
-20
O
C 96hrs