Canon EOS 5D Mark IV L-series Zoom Lens Kit Manuel Du Propriétaire
3
Checking the Battery Information
528
It is convenient to label each registered Battery Pack LP-E6N/LP-E6
with their serial numbers, using commercially-available labels.
with their serial numbers, using commercially-available labels.
1
Write the serial number on a
label.
label.
Write the serial number displayed on
the battery history screen on a label
approx. 25 mm x 15 mm / 1.0 in. x 0.6
in. in size.
the battery history screen on a label
approx. 25 mm x 15 mm / 1.0 in. x 0.6
in. in size.
2
Remove the battery and affix the
label.
label.
Set the power switch to <2>.
Open the battery compartment cover
and remove the battery.
and remove the battery.
Affix the label as shown in the
illustration (on the side with no
electrical contacts).
illustration (on the side with no
electrical contacts).
Repeat this procedure for all of your
batteries so you can easily see the
serial number.
batteries so you can easily see the
serial number.
Labeling Serial Numbers on Batteries
Serial number
7c400300
Do not affix the label on any part other than as shown in the illustration in
step 2. Otherwise, the misplaced label may make it difficult to insert the
battery or impossible to turn on the camera.
step 2. Otherwise, the misplaced label may make it difficult to insert the
battery or impossible to turn on the camera.
If you use Battery Grip BG-E20 (sold separately), the label may peel off
as you repeatedly insert and remove the battery into the battery
magazine. If it peels off, affix a new label.
as you repeatedly insert and remove the battery into the battery
magazine. If it peels off, affix a new label.