Scosche SAC-656 Multipurpose Speaker Mounting Brackets Manuel Du Propriétaire
Notes:
Hardware is supplied to accommodate different applications
depending upon the vehicle. All hardware may not be needed
for your installation.
Check your vehicle. It may or may not be necessary to break
off mounting tabs on the edges of the brackets to ensure a proper fit.
1. Secure speaker to speaker adaptor bracket as shown using
hardware supplied. Note: A 3-hole screw pattern is shown for
mounting the speaker/bracket assembly. The bracket will also allow
mounting assemblies with other hole patterns.
mounting the speaker/bracket assembly. The bracket will also allow
mounting assemblies with other hole patterns.
2. Place
speed clips over mounting holes beside speaker opening
flat side up. Secure speaker/bracket assembly in vehicle following
instructions in the Crutchfield MasterSheet for your particular vehicle
using screws supplied with brackets.
Speaker Adaptor Bracket
142 SAC656
Parts
Supplied:
Supplied:
(2) Brackets
Revision 09/17/14
*142SAC656*
(8) Self-Tapping
Screws
Screws
(8) Speed Clips
(8) 5/8”
Cinch Screws
Cinch Screws
(8) 1/4” Nuts
(8) Washers
Copyright 2014 Crutchfield Corporation
IMPORTANT
Before starting, compare items on your invoice with items
received. Thoroughly check packing materials. If an item
is missing, please call
received. Thoroughly check packing materials. If an item
is missing, please call
Crutchfield at 1-888-955-6000.
Tools Required
Phillips
Screwdriver
Screwdriver
1/4” Wrench
Speed Clips
Mounting Tabs