JVC KW-M730BT Manuel Du Propriétaire
Troubleshooting
86
Read Error
The disc is quite dirty.
The disc is quite dirty.
h Clean the disc. See Precautions on handling discs
Disc is upside down.
h Load the disc with the labeled side up.
Region Code Error
The disc you wanted to play has a region code that
cannot be played with this unit.
The disc you wanted to play has a region code that
cannot be played with this unit.
another disc.
Error 07–67
The unit is not operating correctly due to some reason
or other.
The unit is not operating correctly due to some reason
or other.
h Turn the power off and on again. If the “Error 07−67”
message does not disappear, see your nearest JVC
dealer.
dealer.
No Device (USB device)
The USB device is selected as a source although no USB
device is connected.
The USB device is selected as a source although no USB
device is connected.
h Change the source to any source other than USB/
iPod. Connect a USB device, and change the source
to USB again.
to USB again.
Disconnected (iPod, Bluetooth audio player)
The iPod/Bluetooth audio player is selected as a source
although no iPod/Bluetooth audio player is connected.
The iPod/Bluetooth audio player is selected as a source
although no iPod/Bluetooth audio player is connected.
h Change the source to any source other than iPod/
Bluetooth. Connect an iPod/Bluetooth audio player,
and change the source to iPod/Bluetooth again.
and change the source to iPod/Bluetooth again.
No Media file
The connected USB device contains no playable audio
file. Media was played that doesn’t have data recorded
that the unit can play.
The connected USB device contains no playable audio
file. Media was played that doesn’t have data recorded
that the unit can play.
h See
another USB device.
USB device over current status detected.
The connected USB device is rated a current capacity
higher than the allowable limit.
The connected USB device is rated a current capacity
higher than the allowable limit.
h Check the USB device. Some trouble may have
occurred to the connected USB device.
h Change the source to any source other than USB.
Remove the USB device.
Ñ
SiriusXM
Check Tuner
A SiriusXM tuner is not connected to this unit.
A SiriusXM tuner is not connected to this unit.
h Verify that the SiriusXM Connect Vehicle Tuner cable
is securely connected to the radio.
Subscription Updated - Press Return To Continue
The SiriusXM subscription has been renewed.
The SiriusXM subscription has been renewed.
h Pressing the Control knob will clear the message.
SXM Chan Unavailable
The currently selected channel is unavailable.
The currently selected channel is unavailable.
h —
SXM Ch Unsubscribed
The currently selected channel is not subscribed to.
The currently selected channel is not subscribed to.
h —
SXM Check Antenna
No antenna is connected to the SiriusXM tuner.
No antenna is connected to the SiriusXM tuner.
h Check that an antenna is connected to the SiriusXM
tuner. Check antenna for damages.
SXM No Signal
No SiriusXM radio signal is received.
No SiriusXM radio signal is received.
h Verify that your vehicle is outdoors with a clear view
of the sky.
Channel Locked
The selected channel has been locked by the parental
controls.
The selected channel has been locked by the parental
controls.
h Enter the unlock code when you are asked. See
Incorrect Pass Code entered
The selected channel is a mature or parental lock
channel, and locked by the parental lock or user lock
code.
The selected channel is a mature or parental lock
channel, and locked by the parental lock or user lock
code.
h Enter the correct lock code.
!B5A-1733-00b_17KWV-K_En.indb 86
2017/02/01 11:13