Pioneer MVH-S501BS Manuel Du Propriétaire
- 13 -
- 13 -
En
g
g
lis
h
2
Turn the M.C. dial to select [FUNCTION], then press to confirm.
3
Turn the M.C. dial to select [BSM], then press to confirm.
To seek a station manually
1
1
After selecting the band, press
/
to select a station.
Press and hold
/
then release to seek an available station. Scanning stops
when the unit receives a station. To cancel seek tuning, press
/
.
NOTE
[SEEK] needs to be set to [MAN] in the FUNCTION settings (page 33).
To store stations manually
1
1
While receiving the station you want to store, press and hold one of the number
buttons (1/
buttons (1/
to 6/
) until it stops flashing.
NOTE
You can select a preset channel by pressing
and turning the M.C. dial. After selecting a channel,
press and hold the M.C. dial to store a station.
Disconnect headphones from the device before connecting it to the unit.
USB devices (including Android™)/iPhone
1
1
Open the USB port cover.
2
Plug in the USB device/iPhone using an appropriate cable.
NOTE
To automatically switch to [USB] source when a USB device/iPhone is connected to the unit, set [USB
AUTO] to [ON] in the SYSTEM settings (page 39).
AUTO] to [ON] in the SYSTEM settings (page 39).
CAUTION
Use an optional Pioneer USB cable (CD-U50E) to connect the USB device as any device connected
directly to the unit will protrude out from the unit, which could be dangerous.
directly to the unit will protrude out from the unit, which could be dangerous.
Before removing the device, stop playback.
USB/iPhone/AUX
Playing back