Pioneer MVH-S501BS Manuel Du Propriétaire

Page de 64
- 44 -
En
g
lis
h
– Do not connect the yellow cable to the 
battery by passing it through the hole 
to the engine compartment.
– Cover any disconnected cable 
connectors with insulating tape.
– Do not shorten any cables.
– Never cut the insulation of the power 
cable of this unit in order to share the 
power with other devices. The current 
capacity of the cable is limited.
– Use a fuse of the rating prescribed.
– Never wire the negative speaker cable 
directly to ground.
– Never band together negative cables of 
multiple speakers.
• When this unit is on, control signals are 
sent through the blue/white cable. 
Connect this cable to the system remote 
control of an external power amp or the 
vehicle’s auto-antenna relay control 
terminal (max. 300mA 12 V DC). If the 
vehicle is equipped with a glass antenna, 
connect it to the antenna booster power 
supply terminal.
• Never connect the blue/white cable to 
the power terminal of an external power 
amp. Also, never connect it to the power 
terminal of the auto antenna. Doing so 
may result in battery drain or a 
malfunction.
• The graphical symbol 
 placed on 
the product means direct current.
This unit
Microphone 3 m (9 ft. 10-1/8 in.)
SiriusXM Connect Vehicle Tuner input
Power cord input
Microphone input
Rear output (STD) or middle range 
output (NW)
Front output (STD) or high range output 
(NW)
Antenna input
Fuse (10 A)
Wired remote input
Hard-wired remote control adapter can 
be connected (sold separately).
Subwoofer output
SiriusXM Connect Vehicle Tuner (sold 
separately)
Power cord
Perform these connections when not 
connecting a rear speaker or middle range 
speaker lead to a subwoofer.
Perform these connections when using a 
subwoofer without the optional amplifier.