Alpine UTE-62BT Manuel Du Propriétaire
15
-EN
Adjusting Subwoofer Level/Bass Level/
Treble Level/Balance (Between Left and
Right)/Fader (Between Front and Rear)/
Defeat
Treble Level/Balance (Between Left and
Right)/Fader (Between Front and Rear)/
Defeat
1
Press
YSETUP repeatedly to choose the desired mode.
Each press changes the mode as follows:
SUBWOOFER
*1/*2
BASS LEVEL
*2/*3
TRE LEVEL
*2/*3
BALANCE
FADER
*4
DEFEAT VOLUME
*1 When the subwoofer mode is set to OFF, its level cannot be
*2 Not displayed when BASS ENGINE SQ mode is selected. Refer
*3 Adjustable only when DEFEAT is OFF.
*4 Not displayed when 2WAY/3WAY system mode is set to 3WAY.
Note
• If no operation is performed for 5 seconds, the unit automatically
returns to normal mode.
2
Turn the Rotary encoder until the desired sound is
obtained in each mode.
obtained in each mode.
By setting DEFEAT ON, previously adjusted level settings of BASS
and TREBLE will return to the factory defaults.
and TREBLE will return to the factory defaults.
Sound Setting
You can flexibly customize the unit to suit your own preference and
usage. From the AUDIO SETUP menu, Audio Setting can be modified.
usage. From the AUDIO SETUP menu, Audio Setting can be modified.
1
Press and hold
YSETUP for at least 2 seconds to
activate the SETUP mode.
2
Turn the Rotary encoder to select AUDIO, and then press
ENTER.
ENTER.
3
Turn the Rotary encoder to select the desired sound
setting menu, and then press
setting menu, and then press
ENTER.
EQ PRESETS
*1/*2/*3
BASS ENGIN
*4/*5
PARAMETER
*5/*6
9BAND P-EQ
*1/*3/*7
SOURCE VOL X-OVER
*1/*3
SUBWOOFER
*8
SUBW PHASE
*9
SUBW SYS
*3/*9
LENGTH
*1
TCR
*1
POWER IC MX SETTING
*1/*3
*1 Adjustment cannot be performed when DEFEAT is set to ON.
*2 Any changes made to either EQ PRESETS or 9BAND P-EQ are
reflected in the others’ settings.
*3 These items are not adjustable in BASS ENGINE SQ mode. If
you want to adjust these items separately, follow the confirm
message and select “YES” to exit BASS ENGINE SQ mode, then
make the setting.
message and select “YES” to exit BASS ENGINE SQ mode, then
make the setting.
*4 Not displayed when the Audio Setup mode is activated by
pressing BASS.
*5 Not displayed when 2WAY /3WAY system mode is set to 3WAY.
*6 Not displayed when BASS ENGIN is set to OFF.
*7 In step 3, after selecting a Band (BAND1 to BAND9) from
9BAND P-EQ adjustment mode. Turn the Rotary encoder to
select the desired item, and then press ENTER to continue to
step 4.
select the desired item, and then press ENTER to continue to
step 4.
*8 This item is also related to BASS ENGINE SQ mode when you
adjust sound settings via the Alpine TuneIt App on a
Smartphone. Refer to “Adjusting the sound via the Smartphone”
on page 24.
Smartphone. Refer to “Adjusting the sound via the Smartphone”
on page 24.
*9 These functions are inoperable when SUBWOOFER is set to
OFF.
4
Turn the Rotary encoder to change the setting, and then
press
press
ENTER.
(e.g. Select SUBWOOFER ON or SUBWOOFER OFF)
5
Press and hold
YSETUP for at least 2 seconds to return
to normal mode.
Notes
• Adjustment cannot be performed during a call.
• Pressing t returns to the previous Sound menu mode.
• If no operation is performed for 60 seconds, Sound menu mode is
• Pressing t returns to the previous Sound menu mode.
• If no operation is performed for 60 seconds, Sound menu mode is
canceled.
• You can access the Sound menu mode directly by pressing BASS when
BASS ENGIN is set to OFF. Refer to “Setting BASS ENGINE SQ ON/
OFF” on page 16.
OFF” on page 16.
10 typical equalizer settings are preset at the factory for a variety of
musical source material. USER settings are created in the 9BAND P-EQ
mode.
musical source material. USER settings are created in the 9BAND P-EQ
mode.
USER FLAT (Initial setting) POPS ROCK NEWS JAZZ
ELEC DANCE HIP HOP EASY LIS COUNTRY
CLASSICAL
ELEC DANCE HIP HOP EASY LIS COUNTRY
CLASSICAL
Sound Setting
Subwoofer
+0 ~ +15
Bass level
−7 ~ +7
Treble level
−7 ~ +7
Balance
L15 ~ R15
Fader
R15 ~ F15
Defeat
ON/OFF
Volume
0 ~ 35
/ENTER
/SETUP
BASS
Rotary encoder
Use steps 1 to 5 to select the category you wish to modify. For
details on how to change each setting, see the following
sections below.
details on how to change each setting, see the following
sections below.
Equalizer Presets