Infinity Kappa K4 Manuel Du Propriétaire

Audio input priorities

For safety and ease of operation reasons, your Kappa amp prioritizes audio inputs as follows: 1) ADAS, 2) Bluetooth calls, 3) music/analog audio. 

1)  ADAS messages will broadcast over phone calls and analog audio signals. 

2)  Bluetooth phone calls will play over analog audio signals.

3)  Analog audio will play when neither ADAS nor Bluetooth call signals are present.

Clari-Fi Audio Restoration Technology

•  Clari-Fi Audio Restoration technology improves the sound of compressed music such as satellite radio or MP3 files. By analyzing the 

 

input signal, Clari-Fi restores information that's been lost in the compression process, rebuilding lost details and extending high-frequency 

 bandwidth. 

•  Clari-Fi applies different degrees of processing as necessary. More compressed files will receive more restoration while less compressed 

 

music will receive less. 

To engage, press the Clari-Fi button on remote controller. An indicator light will illuminate on the remote controller when Clari-Fi is active. 

Setting the input level controls

 

To match your amplifier’s input sensitivity (gain) to your source unit’s output level, we recommend the following procedure:

A.  Turn both input level controls counterclockwise to MIN (minimum). 

B.  Play a dynamic music track through your source unit. Turn the source unit’s volume control to the 3/4 position.

C.  Turn front input level control dial clockwise towards MAX until it no longer sounds clear and there are crackling, crunching, hissing or other 

 

types of distortion interfering with the distinct sounds of a musical instrument. 

D.  Slowly turn the front level input control dial counterclockwise until the music sounds clear again, then note or mark where the dial is. That 

 

mark is now your maximum volume setting for clear audio. 

E.  Your front input level is now correctly set. Repeat this process with the rear channels.

11