CRUX CDR-02 Manuel Du Propriétaire

Page de 2
INTERFACING SOLUTIONS
CDR-02
RAM TAILGATE 
HANDLE
W/ CAMERA
RAM
2009 - UP  Ram Truck
PARTS INCLUDED
(1) Black Plastic Handle
(1) 18mm Bullet Camera
(1) 15ft RCA Video Cable
(1) Instruction Sheet
SAFETY PRECAUTIONS
1. Please read through the entire instruction manual before starting any of the installation procedures.
2. This product is under Crux’s 1 year manufacturer’s warranty. Warranty may be voided in the case where 
    the device shows proof of being opened or improper extreme force.
TECH SERVICES
All our products are manufactured under strict quality control. Each device is being tested before shipment. If nevertheless do occur problems 
 if you have technical questions, contact us directly:
Crux Interfacing Solutions Tech Support
1 (855) 822-1348 (Mon - Fri - 9:00 AM - 5:00 PM) Pacific Time
www.cruxinterfacing.com
Rev. 032315
1
INSTALLATION OVERVIEW
YELLOW RCA/
VIDEO SIGNAL
RAM TAILGATE
HANDLE
CAMERA
LOCATION
KEY CYLINDER
LOCATION
CAMERA
INPUT
BLACK/
GROUND
RED/
TO REVERSE
RED BARREL/
CAM POWER
15FT
EXTENSION
SPECIFICATIONS:
CAMERA:
Sensor: CCD
Size: 18mm
Viewing Angle (H):  170°
Viewing Angle (V):  90°
TV System: NTSC / PAL
Guide Lines: Yes
Invert Image: No
Resolution: 480 TV Lines
Illumination: 0.4 Lux / F1.2
Power Supply: 12v
Waterproof: IP67