Rydeen MN312R Manuel Du Propriétaire

Installation

4) Route the mirror cable along the headliner and down the pillar, and make
power, ground and accessory connections.

Yellow- Constant 12V+ source

Red- Ignition controlled ACC 12V+ source.

Black- (-) Ground (Connecting to car chassis works the best)

5) Solder or T-taps on pre-tested and verified wires. Note: No reverse trigger
input required; the screen switches to rear-camera view when camera sends a
video signal input senses video voltage.

6) Turn the key to ACC and the unit should turn on. Hide the cable and assemble
the vehicle.

Note

Please refer to Guidepoint installation manual for the Guidepoint
GPS Vehicle Tracking Box installation. Guidepoint GPS Tracking
Box is sold separately and service activation is necessary. Contact
Guidepoint Systems Inc. for more information (Toll-Free
1-877-477-3463).

Note

Connector B: Pin 11 & 12 are for temperature sensor connections.

Please contact Rydeen Tech Support (Toll-Free 1-877-777-8811)

for more details.