Nikon KeyMission 80 Manuel Du Propriétaire

CT6K01(11)

Here, pairing refers to the setting used to connect the camera and smartphone or tablet (below, “smart device”) 
through Bluetooth.

15:30

N-Mark  
(NFC antenna)

d (menu) 
button

Shutter-release 
button

Setup menu

Turn off

t Insert a microSD memory card with sufficient free space into the camera.
t Check that the battery is sufficiently charged so that the camera does not turn off during the procedure.

t To turn off the camera, press the 

d (menu) button and tap b (turn off ).

t Two types of apps are available: “SnapBridge” and “SnapBridge 360/170”. Use “SnapBridge” when 

pairing with this camera.

t Do not pair from the Bluetooth setting screen of the smart device.

1  Check that the camera is off (the screen is off ).

2  Enable Bluetooth and Wi-Fi® on the smart device.

t Do not pair from the Bluetooth setting screen of the smart device.

3  Install the SnapBridge app.

4  Press the shutter-release button or the 

d (menu) button to turn on the camera.

t On the language selection dialog, select a language by tapping.

5  Scroll through the screen, tap Set, scroll through the next 

screen, and then tap Next.

t The camera enters pairing standby mode.

B If You Tap Later

You can pair later by performing the following operation.
d button M z setup menu M Camera settings M scroll 
through the screen, then Network menu 

M Connect to smart 

the camera to
the smart device.
Non-NFC enabled
devices: select Next.

Cancel

Next

and set SnapBridge 
later from 
the Network menu, 
select Later.

Later

Set