Nikon KeyMission 170 Manuel Du Propriétaire
9
Charging the Battery
If a plug adapter* is included with your camera, securely connect it to the Charging AC
Adapter. Once the two are connected, attempting to forcibly remove the plug adapter
could damage the product.
Adapter. Once the two are connected, attempting to forcibly remove the plug adapter
could damage the product.
* The shape of the plug adapter varies according to the country or region in which
the camera was purchased. This step can be omitted if the plug adapter comes
permanently bonded to the Charging AC Adapter.
permanently bonded to the Charging AC Adapter.
• Charging starts when the camera is connected to an electrical outlet while the
battery is inserted, as shown in the illustration. The status lamps flash green slowly
while the battery is charging.
while the battery is charging.
• When charging is complete, the status lamps turn off. Unplug the Charging AC
Adapter from the electrical outlet, and disconnect the USB cable.
Charging time is about 3 hours for a fully exhausted battery.
Charging time is about 3 hours for a fully exhausted battery.
• The battery cannot be charged when the status lamps are flashing green quickly,
possibly due to one of the reasons described below.
- The ambient temperature is not suited to charging.
- The USB cable or Charging AC Adapter is not properly connected.
- The battery is damaged.
- The ambient temperature is not suited to charging.
- The USB cable or Charging AC Adapter is not properly connected.
- The battery is damaged.
Charging the Battery
USB cable (included)
Electrical outlet
Charging AC Adapter
Status lamp