DJI Zenmuse X5R Manuel Du Propriétaire

ZENMUSE X5R

User Manual

4. Attach the new gimbal mounting plate as shown below. With their flat sides facing

outwards, align the rear mounting plates with the rear bracket's screw holes. Tighten the

screws with a screwdriver.

5. Connect the 8-PIN cable and 10-PIN cable in order.

6. Place the front mounting bracket to the front bracket with its grooved side facing inwards.

Adjust the 8-PIN cable and 10-PIN cable to avoid protrusion, and then tighten the screws.

Mounting

Position

Front Mounting

Plate

Rear Mounting

Plate

Mounting the Zenmuse X5R to the Inspire 1

(Watch Video: http://www.dji.com/product/zenmuse-x5s/info#video)

Replace the Inspire 1 Gimbal Mounting Plate

1. Remove the two black dampers at the front.

2. Disconnect the 10-PIN cable and 8-PIN cable in order. Be careful not to damage the

gimbal cables.

3. Remove the other two black dampers.