Sony STR-DH770 Manuel Du Propriétaire

Page de 50
38
GB
D:\NORM'S JOB\SONY HA\SO160004\STR-DH770 (PMRF 04)\4584079132_GB\050ADD.fm
masterpage: Left
STR-DH770
4-584-079-13(2)
On placement
Place the receiver in a location with 
adequate ventilation to prevent heat 
buildup and prolong the life of the receiver.
Do not place the receiver near heat sources, 
or in a place subject to direct sunlight, 
excessive dust, or mechanical shock.
Do not place anything on top of the cabinet 
that might block the ventilation holes and 
cause malfunctions.
Do not place the receiver near device such 
as a TV, VCR, or tape deck. (If the receiver is 
being used in combination with a TV, VCR, 
or tape deck, and is placed too close to that 
device, noise may result, and picture quality 
may suffer. This is especially likely when 
using an indoor antenna (aerial).)
Use caution when placing the receiver on 
surfaces that have been specially treated 
(with wax, oil, polish, etc.) as staining or 
discoloration of the surface may result.
On operation
Before connecting other device, be sure to 
turn off and unplug the receiver.
On cleaning
Clean the cabinet, panel, and controls with a 
soft cloth slightly moistened with a mild 
detergent solution. Do not use any type of 
abrasive pad, scouring powder, or solvent, 
such as alcohol or benzine.
Supported BLUETOOTH version 
and profiles
Profile refers to a standard set of functions for 
various BLUETOOTH product features. See 
“BLUETOOTH section” in “Specifications” 
(page 40) for the BLUETOOTH version and 
profiles supported by this receiver.
Effective communication range
BLUETOOTH devices should be used within 
approximately 10 meters (33 feet) 
(unobstructed distance) of each other. The 
effective communication range may become 
shorter under the following conditions.
When a person, metal object, wall or other 
obstruction is between the devices with a 
BLUETOOTH connection.
Locations where a wireless LAN is installed.
Around microwave ovens that are in use.
Locations where other electromagnetic 
waves are generated.
Effects of other devices
BLUETOOTH devices and wireless LAN 
(IEEE 802.11b/g/n) device use the same 
frequency band (2.4 GHz). When using your 
BLUETOOTH device near a device with 
wireless LAN capability, electromagnetic 
interference may occur. This could result in 
lower data transfer rates, noise, or inability to 
connect. If this happens, try the following 
remedies:
Use this receiver at least 10 meters (33 feet) 
away from the wireless LAN device.
Turn off the power of the wireless LAN 
device when using your BLUETOOTH device 
within 10 meters (33 feet).
Install this receiver and BLUETOOTH device 
as closer to each other as possible.
Effects on other devices
The radio waves broadcast by this receiver 
may interfere with the operation of some 
medical devices. Since this interference may 
result in malfunction, always turn off the 
power on this receiver and BLUETOOTH 
device in the following locations:
In hospitals, on trains, in airplanes, at gas 
stations, and any place where flammable 
gasses may be present.
Near automatic doors or fire alarms.
This receiver supports security functions that 
comply with the BLUETOOTH specification to 
ensure secure connection during communication 
using BLUETOOTH technology. However, this 
security may be insufficient depending on the 
setting contents and other factors, so always be 
careful when performing communication using 
BLUETOOTH technology.
On BLUETOOTH communication
Note