JBL Pro JBL SRX835P Manuel Du Propriétaire

7

QUICK SETUP GUIDE

way before plugging in your audio source. Turn CH1 and/or 
CH2 Encoders to the left until the level reads “- 100” on  
the LCD. 

2. 

Connect XLR or TRS cable from audio source to CH1 and/or 
CH2 Inputs. 

3. 

Select LINE, CONSUMER or MIC gain setting by pushing the 
correct CHANNEL ENCODER twice. You will see a rectangle 
highlighting the sensitivity setting. Simply roll the encoder  
left or right to select the correct setting. Once the correct 
setting is shown, push the encoder one more time to make 
your selection.

       

1. 

Set the gain level for each input using the CH1 and/or CH2 
ENCODER. The input level meter on the LCD will allow you to 
monitor your input level. 

2. 

Once the input level is set, user the MASTER ENCODER to 
turn up (Right) or turn down (Left) the overall level until the 
desired volume is reached.

1. 

Connect the supplied power cord to the Blue IEC inlet on 
the rear of the speaker 

2. 

Connect the power cord to an available power outlet. 
Once the power cord is plugged into the power source, 
the Green Power LED will illuminate. 

3. 

Once the Green Power LED illuminates, press the Power 
Button. After several seconds, you will notice the LCD 
Screen boot and you will now be on the main screen. 

 

1. 

The CH1 and CH2 Input levels and Master Level default 
to -20dB. It’s a good idea to turn the inputs down all the 

CH

2

CH 

1

A HARMAN INTERNATIONAL COMPANY        

DESIGNED AND ENGINEERED IN THE USA

MADE IN MEXICO

SERIAL NO.

JBL PROFESSIONAL     NORTHRIDGE,   CA   USA

MAIN  MENU

PRESET
AUTO  DIM
AUTO  SLEEP
METERS

2            MAIN

OFF

ON