Nikon Coolpix W300 Manuel Du Propriétaire

Press the 

k button when the dialog on 

the right is displayed on the camera.

Launch SnapBridge on the smart device 
when the dialog on the right is 
displayed on the camera.

• Place the smart device close to the camera.

• If you are pairing after unpairing (page 7), launch 

SnapBridge and then tap w in the y Connect 
tab.

When the name of the camera you 
want to pair with is displayed in the 
smart device, tap it.

• For iOS:

If you are pairing for the first time, a dialog 
explaining the procedure is displayed. Confirm the 
details and tap Understood (If Understood is not 
displayed, scroll down the screen.).
Tap the camera name again when the accessory 
selection screen is displayed (it may take some time for the camera name to be 
displayed.).

• If the camera name is not displayed even after waiting for a while, close SnapBridge 

completely and perform pairing again from step 3.

Confirm that the camera and smart 
device display the same authentication 
code (six digits).

• The authentication code may not be displayed in 

some versions of iOS. Proceed to step 6 even in 
such cases.

Use SnapBridge to send photos to your

smar t device and share them online.

To skip this screen and set SnapBridge

later from the Network menu, press

MENU.

Later

Set

App
SnapBridge

Camera

On your smar t device, go to the app

store and search for SnapBridge. After

installing, open the SnapBridge app.

Cancel

Connect to Camera

Camera name

Auth. code

000000

Confirm that the same authentication

code is displayed on the smar t device

and press OK.

Cancel

OK