Canon PowerShot SX730 HS Manuel Du Propriétaire

18

 

●

For details on charging time and the number of shots and 
recording time possible with a fully charged battery pack, see 
“Power” (= 183) and “Battery Charger CB-2LH/CB-2LHE” 
(= 184).

 

●

Charged battery packs gradually lose their charge, even when 
they are not used. Charge the battery pack on (or immediately 
before) the day of use.

 

●

The charger can be used in areas with 100 – 240 V AC power 
(50/60 Hz). For power outlets in a different format, use a 
commercially available adapter for the plug. Never use an 
electrical transformer designed for traveling, which may damage 
the battery pack.

Insert the included battery pack and a memory card (sold separately).

Note that before using a memory card that is new or has been formatted 

in another device, you should format the memory card with this camera 

 

●

Slide the switch (1) and open the cover 

(2).

(2)

(1)

Before use, charge the battery pack with the included charger. Be sure to 

charge the battery pack initially, because the camera is not sold with the 

battery pack charged.

 

●

After aligning the   marks on the battery 

pack and charger, insert the battery pack 

by pushing it in (1) and down (2).

 

●

CB-2LH: Flip out the plug (1) and plug the 

charger into a power outlet (2).

 

●

CB-2LHE: Plug the power cord into the 

charger, then plug the other end into a 

power outlet.

 

●

The charging lamp turns orange, and 

charging begins.

 

●

When charging is finished, the lamp turns 

green.

 

●

After unplugging the battery charger, 

remove the battery pack by pushing it in 

(1) and up (2).

 

●

To protect the battery pack and keep it in optimal condition, do not 
charge it continuously for more than 24 hours.

 

●

For battery chargers that use a power cord, do not attach 
the charger or cord to other objects. Doing so could result in 
malfunction or damage to the product.

(1)

(2)

(1)

(2)

CB-2LH

CB-2LHE

(2)

(1)