Tascam DR-60DmkII Manuel Du Propriétaire

The following is a list of the popup messages that might appear on the DR-60DMKII under certain conditions. Refer to this list if one of these 

popup messages appears and you want to check the meaning or determine a proper response.

File Name ERR

The DIVIDE function would cause the file name to exceed 200 characters. The DIVIDE function adds “a” or “b” to the 

end of the original file name. Before choosing the DIVIDE function, connect the unit to a computer and edit the file 

name to less than 198 characters.

Dup File Name

The DIVIDE function would cause the file name to be the same as that of an existing file. The DIVIDE function adds “a“ 

or “b” to the end of the original file name. Before choosing the DIVIDE function, connect the unit to a computer and 

edit the file name.

File Not Found

The file either cannot be found or could be damaged. Check the file using a computer.

Non-Supported

The audio file is not a supported format. Please see "9 – Connecting with a computer" for file formats that this unit 

can use.

Battery Empty

The battery is almost out of power. Replace the AA batteries.

MBR Error Init CARD

The SD card is not formatted properly or the formatting is broken. Change the SD card or press the DATA dial when 

this message appears to format the SD card in FAT format.
CAUTION: Execution of FAT formatting erases all data currently on the SD card.

Format Error
Format CARD

The FAT formatting of the SD card is abnormal or broken. This message also appears if you FAT formatted the SD 

card using a computer connected by USB and if a new SD card is inserted in the unit. Always use the DR-60DMKII to 

conduct FAT formatting of SD card to be used with it. Change the SD card or press the DATA dial when this message 

appears to format the SD card in FAT format.
CAUTION: Execution of FAT formatting erases all data currently on the SD card.

File Not Found
Make Sys File

The system file is missing. This unit requires a system file for operation. When this message appears, press the DATA 

dial to automatically create a system file.

Invalid SysFile
Make Sys File

The system file required to operate this unit is invalid. When this message appears, press the DATA dial to automati-

cally create a system file.

Invalid Card
Change Card

Something might be wrong with the SD card. Change the SD card.