Yamaha R-N803 Manuel Du Propriétaire

■

Retain a full tonal range at any volume level, thus 
compensating for the human ears’ loss of sensitivity to 
high and low-frequency ranges at low volume.

The LOUDNESS control does not function when the YPAO 
Volume function (p. 50) is enabled.

If the PURE DIRECT switch is turned on with the LOUDNESS 
control set at a certain level, the input signals bypass the 
LOUDNESS control, resulting in a sudden increase in the sound 
output level. To prevent your ears or the speakers from being 
damaged, be sure to press the PURE DIRECT switch after 
lowering the sound output level or after checking that the 
LOUDNESS control is properly set.

After setting the LOUDNESS control, enjoy listening to music at 
your preferred volume level. If the effect of the LOUDNESS 
control setting is too strong or weak, readjust the LOUDNESS 
control.

Use this feature to automatically set this unit to standby 
mode after a certain amount of time. The sleep timer is 
useful when you are going to sleep while this unit is 
playing or recording a source.

The sleep timer can only be set with the remote control.

Press SLEEP repeatedly to set the amount of 
time before this unit is set to standby mode.
Each time you press SLEEP, the front display 
changes as shown below.

The SLEEP indicator blinks while setting the amount 
of time for the sleep timer.

If the sleep timer is set, the SLEEP indicator on the 
front display lights up.

• To disable the sleep timer, select “Sleep Off”.
• The sleep timer setting can also be canceled by pressing 

A

(power) to set this unit to standby mode.

A

Sleep 120min.