Yamaha R-N803 Manuel Du Propriétaire

DAB (Digital Audio Broadcasting) uses digital signals for 
clearer sound and more stable reception compared to 
analog signals. This unit can also receive DAB+ (an 
upgraded version of DAB) that allows for more stations 
using MPEG-4 audio codec (AAC+), which has a more 
efficient transmission method.

This unit supports Band III (174 to 240 MHz) only.

Before tuning in to DAB stations, an initial scan must be 
performed. When you select the DAB for the first time, 
the initial scan is performed automatically.
To listen to a DAB station, connect the antenna as 
described in “Connecting the DAB/FM antenna (R-
N803D)” (p.13).

The initial scan starts. During the scan, the progress is 
displayed on the front display.
When the scan is complete, the top of the list of the 
scanned stations appears on the front display.

• If no DAB radio stations are found by an initial scan, “Not 

Found” appears on the front display, followed by “Off Air”. 
Press BAND twice to re-select the DAB band and scan again.

• You can check reception strength of each DAB channel label (p. 

• To perform an initial scan again after some DAB radio stations 

are stored, select “Initiate Scan” (p.46) in the “OPTION” menu. 
If you perform an initial scan again, the DAB radio stations 
currently registered to the preset numbers will be cleared.

You can select a DAB radio station from the stations 
stored by the initial scan.

Press TUNING jj / ii to select a DAB radio 
station.

• “Off Air” appears when the selected DAB radio station is 

currently not available.

• When the unit is receiving a secondary station, “2” appears next 

to “DAB”.

jj / ii

BBC Radio 4

DAB