Yamaha R-N803 Manuel Du Propriétaire

You can play back music files stored on a Bluetooth 
device (such as mobile device) on the unit.
Please also refer to the owner’s manual of your Bluetooth 
device.

• To use the Bluetooth function, set “Bluetooth” (p. 50) in the 

“Setup” menu to “On” (Default).

• A Bluetooth device may not be detected by the unit or some 

feature may not be compatible, depending on the model.

• You can transmit audio to Bluetooth speakers or headphones 

using “MusicCast CONTROLLER” (p. 20). The audio output 
can only be selected from “MusicCast CONTROLLER”.

When connecting a Bluetooth device to the unit for the 
first time, the pairing operation is required to perform. 
Pairing is an operation that registers the Bluetooth devices 
with each other beforehand. Once pairing has been 
completed, subsequent reconnection will be easy even 
after the Bluetooth connection is disconnected.

Press BLUETOOTH to select “Bluetooth” as 
the input source.
If another Bluetooth device is already connected, 
disconnect the Bluetooth connection before you 
perform a pairing operation.

Turn on the Bluetooth function of the 
Bluetooth device.

On the Bluetooth device, select the unit 
(network name) from the available device list.
After pairing has been completed and the unit is 
connected to the Bluetooth device, “Connected” 
appears on the front display, and Bluetooth indicator 
will be light up.

• If the pass key is required, enter the number “0000”.
• You can change the network name of this unit in “Network 

Name” (p.49) in the “Setup” menu.

Connect a paired Bluetooth device and start playback. 
Check the following beforehand:
• Pairing has been completed.
• Bluetooth function on the Bluetooth device is turned on.

If the unit detects the Bluetooth device previously connected, the 
unit automatically connects to the Bluetooth device after Step 1. 
To establish another Bluetooth connection, first disconnect the 
current Bluetooth connection.

Bluetooth device 

  Connected

BLUETOOTH