Yamaha R-N803 Manuel Du Propriétaire
53
En
Configuring the system settings (ADVANCED SETUP menu)
English
AD
V
A
NCED
OP
ERA
TI
ON
Setting tuner frequency step (TU)
(Asia and General models only)
Selects the step size for locating tuner frequencies.
Selects the step size for locating tuner frequencies.
Settings
FM100/AM10, FM50/AM9 (Default)
FM100/AM10, FM50/AM9 (Default)
Restoring the default settings (INIT)
Restores the default settings for the unit.
Choices
Updating the firmware (UPDATE)
New firmware that provides additional features or product
improvements will be released as needed. If the unit is
connected to the Internet, you can download the firmware
via the network. For details, refer to the information
supplied with updates.
improvements will be released as needed. If the unit is
connected to the Internet, you can download the firmware
via the network. For details, refer to the information
supplied with updates.
■
Firmware update procedure
Do not perform this procedure unless firmware update is
necessary. Also, make sure you read the information
supplied with updates before updating the firmware.
necessary. Also, make sure you read the information
supplied with updates before updating the firmware.
1
Press SELECT/ENTER repeatedly to select
“USB” or “NETWORK” and press DISPLAY to
start firmware update.
“USB” or “NETWORK” and press DISPLAY to
start firmware update.
Choices
Note
If the unit detects newer firmware over the network, “NEW FW
Available” appears as the “Information” menu item in
“Network”. In this case, you can also update the unit’s firmware
by following the procedure in “Updating the unit’s firmware via
the network” (p. 54).
Available” appears as the “Information” menu item in
“Network”. In this case, you can also update the unit’s firmware
by following the procedure in “Updating the unit’s firmware via
the network” (p. 54).
ALL
Restores the default settings for the unit.
NETWORK
Initialize all of the network, Bluetooth and USB
settings. When performing the initialization, the
preset (p. 41) registered by NET/USB input will
be cleared.
settings. When performing the initialization, the
preset (p. 41) registered by NET/USB input will
be cleared.
CANCEL
Does not perform an initialization.
TU••••FM50/AM9
INIT••••CANCEL
USB
Update the firmware using a USB memory device.
NETWORK
Update the firmware via the network.
UPDATE•NETWORK