Revel B1 Manuel Du Propriétaire
11
B1 Subwoofer
Owner’s Manual
EQUALIZATION CONTROLS
Figure 18: Equalization controls
Optimizes the subwoofer’s response for your specific listening room.
The parametric equalizer includes variable controls to adjust Frequency,
Bandwidth and Level, as shown in Figure 18.
The parametric equalizer includes variable controls to adjust Frequency,
Bandwidth and Level, as shown in Figure 18.
NOTE: Specific measurement equipment is required to properly
adjust the Equalization controls. Your authorized Revel dealer can
make the appropriate measurements, using suitable equipment to
ensure optimal results.
adjust the Equalization controls. Your authorized Revel dealer can
make the appropriate measurements, using suitable equipment to
ensure optimal results.
POWER SWITCH
Connects or disconnects power from the AC input cord. During periods
of intermittent use, the Power Switch can be left on. Turn off the Power
Switch for extended periods of nonuse.
of intermittent use, the Power Switch can be left on. Turn off the Power
Switch for extended periods of nonuse.
AC INPUT CORD
Provides power to the B1 through the power cord.
ROUTINE CARE & MAINTENANCE
The B1 cabinet’s finish does not require routine maintenance. However,
cabinet surfaces that have been marked with fingerprints, dust or other
dirt can be cleaned using a soft cloth. Do not use any cleaning products
or polishes on the cabinet or grille.
cabinet surfaces that have been marked with fingerprints, dust or other
dirt can be cleaned using a soft cloth. Do not use any cleaning products
or polishes on the cabinet or grille.
SPECIFICATIONS
B1 SUBWOOFER
Frequency Response
+/–0.5dB in the pass-band
Low Frequency
–3dB at 36Hz
Extension (Anechoic)
–6dB at 32Hz
–10dB at 29Hz
–10dB at 29Hz
Maximum Amplifier Output
20Hz – 150Hz with no more than
0.1% THD, 250W RMS, 300 dynamic
0.1% THD, 250W RMS, 300 dynamic
Low-Pass Crossover
Frequencies
Frequencies
50Hz – 150Hz, 24dB/octave,
continuously variable
continuously variable
Power Requirements
120V – 60Hz, 2AMP
220 – 240V -50/60Hz AMP
Height
17-3/4" (45.0cm), including feet
Width
15-3/4" (40.0cm)
Depth
14" (35.6cm) with grille
Weight
51 lb (23.15kg)
Features, specifications and appearance are subject to change
without notice.
without notice.
WARRANTY
Revel Series speakers are warranted against defects. The duration of
the speaker’s warranty depends on the laws in the country in which it
was purchased. Your local Revel retailer can help you determine the
length of your warranty.
the speaker’s warranty depends on the laws in the country in which it
was purchased. Your local Revel retailer can help you determine the
length of your warranty.