Yamaha CD-S300 Manuel Du Propriétaire

• Frequency response ..................................... 2 Hz - 20 kHz, ± 0.5 dB

• Harmonic distortion + noise (1 kHz)......................... 0.003 % or less

• S/N ratio.................................................................... 105 dB or more

• Dynamic range............................................................ 96 dB or more

• Output voltage (1 kHz, 0 dB) ...........................................2.0 ± 0.3 V

• Material..................................................................................GaAlAs

• Wavelength .............................................................................790 nm

• Laser Output ..............................................................max. 1.23 

μW*

* This output is the value measured at a distance of about 200 mm 

from the objective lens surface on the Optical Pick-up Block.

• Power requirements

U.S.A. and Canada models .............................. AC 120 V, 60 Hz
Australia model ................................................ AC 240 V, 50 Hz
Europe and U.K. models .................................. AC 230 V, 50 Hz
Asia and General models ...... AC 110-120/220-240 V, 50/60 Hz
China model ..................................................... AC 220 V, 50 Hz

• Operating temperature............... +5 

°C to +35 °C (+41 °F to +95 °F)

• Power consumption................................................................... 13 W

• Dimensions (W × H × D)................................... 435 × 86 × 260 mm 

(17 1/8 × 3 3/8 × 10 1/4 in)

• Weight ........................................................................3.5 kg (7.7 lbs)

Please note that all specifications are subject to change 
without notice.

“iPod” is a trademark of Apple Inc., registered in U.S. and 
other countries.
“Made for iPod” means that an electronic accessory has 
been designed to connect specifically to iPod and has been 
certified by the developer to meet Apple performance 
standards.
Apple is not responsible for the operation of this device or 
its compliance with safety and regulatory standards.

This unit is being subjected to vibrations or 
impacts.

Relocate this unit.

—

The disc is dirty.

Clean the disc.

Improper cable connections.

Securely connect the audio cables. If the 
problem persists, the cables may be defective.

The tuner is too close to this unit.

Move the tuner and this unit farther apart or turn 
off this unit.

—

The disc may be warped.

Replace the disc.

—

Wrong distance or angle.

The remote control functions within a 
maximum range of 6 m (20 ft) and no more than 
30 degrees off-axis from the front panel.

Direct sunlight or lighting (from an inverter type 
of fluorescent lamp, etc.) is striking the remote 
control sensor of this unit.

Reposition this unit.

—

The batteries are weak.

Replace all batteries.