McIntosh MCT450 Manuel Du Propriétaire
![McIntosh](https://files.manualsbrain.com/attachments/722eb2928c9425632e82ddf0156c0e876482ce5c/common/fit/150/50/9bf47422f3ae4c9a130c29344122604a9b5ed11cb0996d0136c5f30bdb94/brand_logo.png)
16
How to Load and Unload a Disc
1. Press the OPEN/CLOSE Push-button. The disc
tray will slide out allowing a CD Disc to be loaded.
Refer to figure 6.
Refer to figure 6.
2. Press the OPEN/CLOSE Push-button
and the disc tray will close. Refer to fig-
ure 7. Loading of the CD Disc’s Table
of Contents (number of tracks and
WRWDOSOD\LQJWLPHZLOOEHLQGLFDWHG
on the Front Panel Display. Refer to
figure 8.
ure 7. Loading of the CD Disc’s Table
of Contents (number of tracks and
WRWDOSOD\LQJWLPHZLOOEHLQGLFDWHG
on the Front Panel Display. Refer to
figure 8.
Note: When a Disc is placed in the tray and the PLAY/
PAUSE Push-button is pressed, the tray will close
and the first track will start playing.
and the first track will start playing.
3. Pressing the OPEN/CLOSE Push-button will stop
playback of the disc and the disc tray will open.
Power On and Off
The LED above the STANDBY/ON Push-button lights
to indicate the MCT450 is connected to
AC Power. Refer to figure 1. The LED
also indicates the status of the Auto
Off Feature. When the MCT450 is in
the Standby Mode, green illumination
indicates the Auto Off Feature is enabled
GHIDXOWVHWWLQJDQGUHGLOOXPLQDWLRQLQ-
dicates the Auto Off Feature is disabled. For additional
information refer to “Power Mode” on page 20.
The LED above the STANDBY/ON Push-button lights
to indicate the MCT450 is connected to
AC Power. Refer to figure 1. The LED
also indicates the status of the Auto
Off Feature. When the MCT450 is in
the Standby Mode, green illumination
indicates the Auto Off Feature is enabled
GHIDXOWVHWWLQJDQGUHGLOOXPLQDWLRQLQ-
dicates the Auto Off Feature is disabled. For additional
information refer to “Power Mode” on page 20.
Note: When AC Power is initially applied to the
MCT450, the unit will momentarily switch On
and then go into the Standby Mode.
and then go into the Standby Mode.
To Switch ON the MCT450, momentarily press the
STANDBY/ON Push-button on the Front Panel or
WKH3RZHU3XVKEXWWRQRQWKH5HPRWH&RQ-
trol. Refer to figures 2 and 21. The LED above the
STANDBY/ON Push-button illuminates green. The
Front Panel Display will momentarily indicate “DISC”
followed by “READING” and then “NO DISC”.
Refer to figures 2, 3, 4, 5 and 21. To switch OFF the
MCT450, momentarily press the STANDBY/ON Push-
button on the Front Panel or the OFF Push-button on
the Remote Control.
WKH3RZHU3XVKEXWWRQRQWKH5HPRWH&RQ-
trol. Refer to figures 2 and 21. The LED above the
STANDBY/ON Push-button illuminates green. The
Front Panel Display will momentarily indicate “DISC”
followed by “READING” and then “NO DISC”.
Refer to figures 2, 3, 4, 5 and 21. To switch OFF the
MCT450, momentarily press the STANDBY/ON Push-
button on the Front Panel or the OFF Push-button on
the Remote Control.
+RZWR3OD\D6$&''LVF
Load a SACD Disc into the MCT450. The Front Panel
Display will first scroll the Album Title of the SACD
'LVFDYDLODEOHRQPRVW6$&''LVFV5HIHUWRILJXUHV
9, 10 and 11.
Load a SACD Disc into the MCT450. The Front Panel
Display will first scroll the Album Title of the SACD
'LVFDYDLODEOHRQPRVW6$&''LVFV5HIHUWRILJXUHV
9, 10 and 11.
The Album Title is followed by the Table of Contents.
Refer to figure 12.
Refer to figure 12.
Press the PLAY/PAUSE
f/ Push-button on the Front
Panel of the MCT450 or on the Remote Control. Refer
to figures 2 and 21. The Disc will start playing the
first track of the SACD Layer.
to figures 2 and 21. The Disc will start playing the
first track of the SACD Layer.
Note: The default setting for SACD/CD Hybrid Disc
is to play the SACD Stereo Layer. The default
setting may be changed to play the CD Layer
or the SACD Multichannel Layer, when avail-
able. With the MCT450 On and no disc loaded,
press the DISC LAYER Push-button until the
Front Panel Display indicates the desired
layer.
setting may be changed to play the CD Layer
or the SACD Multichannel Layer, when avail-
able. With the MCT450 On and no disc loaded,
press the DISC LAYER Push-button until the
Front Panel Display indicates the desired
layer.
How to Operate the MCT450
Figure 2
Figure 6
O P E N
Figure 3
D I S C
Figure 5
N O D I S C
Figure 4
R E A D I N G
C L O S E
Figure 7
1 2 5 8 m 3 2 s
Figure 8
Figure 9
A L B U M A R T I S T : J a c
T I T L E : D v o r a k : C e l
Figure 10
a k : C e l l o C o n c e r t
Figure 11
8 4 8 m 1 2 s
Figure 12
Figure 1