Yamaha CD-S3000 Manuel Du Propriétaire

Press ENTER.
The setting value flashes for 3 seconds, then the unit 
resumes to normal mode.
To cancel the setting, press CLEAR.

• As the DPLL bandwidth setting value approaches “Lowest,” the 

accuracy of the operating clock in the DAC improves, but the 
unit may be susceptible to a change in the clock of the external 
component. The sound from such a component may more easily 
skips.

• As the DPLL bandwidth setting value approaches “Highest,” 

the accuracy of the operating clock in the DAC deteriorates, but 
the unit is far less susceptible to a change in the clock of the 
external component, and the sound from such a component 
hardly skips.

■ Setting the AUTO POWER STANDBY 

The AUTO POWER STANDBY function can be set to 
ON or OFF. When set to ON, if the unit is not operated for 
30 minutes with no audio signal detected, it automatically 
goes to STANDBY mode. When set to OFF, the unit does 
not go to STANDBY mode automatically.

Open the disc tray and remove any currently-
loaded disc from the unit.
Skip step 1 to 3 if “NO DISC” appears on the 
information display.

Press SOURCE to select “DISC” as the audio 
source.
“NO DISC” appears on the information display.

 (Stop) key: The AUTO POWER STANDBY 

function switches to ON, and 
“AutoSTBY ON” appears on the 
information display.

 (Play) key: The AUTO POWER STANDBY 

function switches to OFF, and 
“AutoSTBY OFF” appears on the 
information display.

• The default setting for the AUTO POWER STANDBY function 

is ON.

• This setting is retained even if you turn off this unit.