Samsung BD-J5900 Manuel Du Propriétaire

G

✎

If your wireless router supports DHCP, this player can use a DHCP or static IP 

 

■

address to connect to the wireless network.

Set your wireless router to Infrastructure mode. Ad-hoc mode is not supported.

 

■

The player supports only the following wireless security key protocols:  

 

■

  -  WEP (OPEN/SHARED), WPA-PSK (TKIP/AES),  

  WPA2-PSK (TKIP/AES)

Select a channel on the wireless router that is not currently being used. If the 

 

■

channel set for the wireless router is currently being used by another device 
nearby, it will result in interference and communication failure.

In compliance with the newest Wi-Fi certification specifications, Samsung 

 

■

Blu-ray players do not support WEP, TKIP, or TKIP-AES (WPS2 Mixed) security 
encryption in networks running in the 802.11n mode.

Wireless LAN, by its nature, may cause interference, depending on the 

 

■

operating conditions (router performance, distance, obstacles, interference by 
other radio devices, etc).

Settings

The Home screen will not appear if 

 

n

you do not configure the Setup.
The OSD (On Screen Display) may 

 

n

change in this player after you upgrade 
the software version.
The access steps may differ 

 

n

depending on the menu you 
selected.
After the Setup process is complete, 

 

n

you can then operate the panel 
buttons and remote control.

After you have connected the player 
to your TV, turn on the TV and 
player. When you turn on the player 
the first time, the player's Setup 
screen appears on the TV. The Setup 
procedure lets you set the On Screen 
Display (OSD) and menu languages, 
the aspect ratio (screen size), the 
network type, and connect the player 
to your network.
To run the Setup procedure, follow 
these steps:

Plug in the Blu-ray player, turn on 

your TV, and then turn on the Blu-
ray player by pressing the POWER 
button on the remote. The Setup 
Language screen appears.

> Move  " Select

Setup I On-Screen Language

Select the desired language, 

and then press the E button. 

The Start screen appears.

The Start screen appears.

a

" Select

Press the 

E button. The TV 

Aspect screen appears. 
On the TV Aspect screen, select 

the desired TV Aspect Ratio, and 
then press the E button. The 

Network screen appears.

✎

An explanation of each Aspect Ratio 

 

■

appears on the screen. Highlight 
each choice to see each explanation. 
If you have an HDTV, we suggest 
you choose 16:9 original.