Samsung BD-J5900 Manuel Du Propriétaire

Select the IP Setting field, and 

then press the E button.
Select 

Enter manually in the IP 

Setting field, and then press the 
E button.
Select a parameter to enter (

Address, for example), and then 
press the E button.  

Use the number keypad on your 
remote control to enter the numbers 
for the parameter. Use the ◀▶ 
buttons on the remote control to 
move from entry field to entry field 
within a parameter. When done with 
one parameter, press the E button.
Press the ▲ or ▼ button to move to 

another parameter, and then enter 
the numbers for that parameter 
following the instructions in Step 5. 
Repeat Steps 5 and 6 until you 

have filled in all parameters.

✎

You can get the Network parameters 

 

■

from your Internet provider.

When finished entering all the 

parameters, press the RETURN or 
EXIT button. The player verifies 
the network connection, and then 
connects to the network.

Select the IP Setting field, and 

then press the E button.
Select 

Enter manually in the IP 

Setting field, and then press the 
E button.
S

6.  elect a parameter to enter (IP 

Address, for example), and then 
press E button. Use the number 

keypad on your remote control to 
enter the numbers for the parameter. 
Use the ◀▶ buttons on the remote 
control to move from entry field 
to entry field within a parameter. 
When done with one parameter, 
press the E button.
Press the ▲ or ▼ button to move to 

another parameter, and then enter 
the numbers for that parameter 
following the instructions in Step 6.
Repeat Steps 6 and 7 until you 

have filled in all parameters.

✎

You can get the Network parameters 

 

■

from your Internet provider.

When finished, press the 

or EXIT button. The Security 
Screen appears.
On the Security screen, enter your 

network's Security Code or Pass 
Phrase. Enter numbers directly using 
the number buttons on your remote 
control. Enter letters by selecting a 
letter with the ▲▼◀▶ buttons, and 
then pressing the E button.

You can setup a wireless network 
connection in four ways: 

Wireless Automatic 

 

-

Wireless Manual 

 

-

WPS(PBC)

 

-

WPS(PIN)

 

-
When you configure the wireless 
network connection, any wireless 
network devices currently connected 
through the player or, if applicable, 
the player's current wired connection, 
will be disconnected.

 

In the Home screen, select 

Settings, and then press the E 

button.
Select 

Network, and then press 

the E button.
Select 

Network Settings, and then 

press the E button.
Select 

Wireless in the Network 

Settings screen, and then press 
the E button. The player 

searches for and then displays a 
list of the available networks.

m Move  " Select 

' Return

Select the desired network, and 

then press the E button.
On the Security screen, enter your 

network's Security Code or Pass 
Phrase. 
Enter numbers directly using the 
number buttons on your remote 
control. Enter letters by selecting 
a letter with an arrow button, and 
then pressing E button.
When

 

finished

, select Done and then 

press the E button. The player 

verifies the network connection and 
then connects to the network.
When verification is complete, 

select OK, and then press the E 

button.

✎

You should be able to find the 

 

■

Security Code or Pass Phrase on 
one of the set up screens you used 
to set up your router or modem.

 

If you have a static IP address or 
the Automatic procedure does not 
work, you'll need to set the Network 
Settings values manually.

Follow the directions in Wireless - 

Automatic through Step 5.
The player tries to connect to the  

network, and then displays the 
connection failed message.
On the bottom of the screen, 

select IP Settings, and then press 
the E button.  

The IP Settings screen appears.