HP Photosmart 720 Mode D'Emploi
26
hp photosmart 720 user’s manual
Using the flash
When the camera is turned on, the flash is automatically set to
Auto Flash
. If you change the flash setting, the camera will
remain in that setting until you change it again or turn off the
camera.
To set the flash, press the
Flash
button until the desired
setting appears on the Status LCD. The following table
describes the different flash settings:
Icon
Setting
Description
Auto Flash
The camera measures light and uses the
flash if necessary.
Red-eye
Reduction
The camera measures light and uses the
flash with red-eye reduction if
necessary.
Flash On
The camera always flashes. If the light
is behind your subject, you can use the
flash to increase the light on the front of
your subject. This is also called “fill-
flash.”
Flash Off
The camera will not flash. Use this
setting when you do not want a flash
(such as with distant objects). This may
result in long exposures that will require
using a tripod.
AUTO
AUTO