HP Photosmart 720 Mode D'Emploi
38
hp photosmart 720 user’s manual
Date & time
This setting determines the current date and time for the
camera. This is usually done when you first set up the camera,
but you may need to re-set the date and time when you are
travelling to different time zones or when the batteries are out
of the camera for more than10 minutes.
1
In the
Setup
menu, select
Date & Time
.
2
Follow the same procedure used in
Welcome screen
This setting determines the image that appears when the
camera is turned on. You can select any image available in the
camera or the HP logo, which is the default setting.
1
In Playback mode, scroll to the image you want by using
the
buttons, then press OK to display the Main menu.
2
In the Main menu, select the
Setup
option.
3
In the
Setup
menu, select
Welcome Screen
.
4
Select
This Image
to use the
current image,
HP Logo
to return
to the factory setting, or
Exit
to
leave the current welcome screen
unchanged.
5
Press OK to activate the selection
you made in the previous step.