Kodak DC290 Mode D'Emploi
22
Setting Flash, Exposure Compensation, Picture
Type, and Quality
Type, and Quality
You set the Flash, Exposure Compensation, Picture Type, and Quality settings
using the Scroll and Select buttons located on top of the camera.
using the Scroll and Select buttons located on top of the camera.
Setting the Self-Timer
Flash—see page 6.
Picture Type—see
page 7.
page 7.
Quality—see page 12.
1
Set the Mode dial to Capture.
2
Press Scroll to scroll through the first four
functions on the Status display: Flash,
Exposure, Picture Type, and Quality.
functions on the Status display: Flash,
Exposure, Picture Type, and Quality.
3
When the function you want to change is
flashing, press Select to toggle through the
choices for the active function.
flashing, press Select to toggle through the
choices for the active function.
The new selection takes effect if you press
Scroll again to move to another function or
if you do not press a button for 5 seconds.
Scroll again to move to another function or
if you do not press a button for 5 seconds.
Press Timer once to activate the self-timer.
The self-timer is deactivated after the picture is
taken. For more information, see page 8.
taken. For more information, see page 8.