Vivitar ViviCam 3720 Mode D'Emploi
3-4 Use Your Digital Camera
1. Take Pictures
You just press down the shutter button and with a distinct beeping
sound, a snapshot is finished. At the same time, the number on the
monitor screen will decrease by one.
1. Take Pictures
You just press down the shutter button and with a distinct beeping
sound, a snapshot is finished. At the same time, the number on the
monitor screen will decrease by one.
2. Self-Timer
Press the menu button into the menu, change to the SELF-TIMER
mode, then press the menu button to confirm. Press the shutter button,
the self-timer LED will blink for 10 seconds and then capture a
picture
Press the menu button into the menu, change to the SELF-TIMER
mode, then press the menu button to confirm. Press the shutter button,
the self-timer LED will blink for 10 seconds and then capture a
picture
3. Take Video
Press the menu button into the menu, change to the VIDEO mode,
then press the menu button to confirm, Press the shutter button starts
recording,
Press the menu button into the menu, change to the VIDEO mode,
then press the menu button to confirm, Press the shutter button starts
recording,
4. Use the Flash
Press the flash button into the FLASH AUTO or ON mode, the camera
will charge the flash, the monitor screen will be close and the
operation LED will blink, When LED stops blinking and the monitor
screen turns on, the charging is done. The FLASH ON function will
always fire the flash, the FLASH AUTO function will fireauto
-matically when required, When the shutter button is pressed,
the flash will fire.
Press the flash button into the FLASH AUTO or ON mode, the camera
will charge the flash, the monitor screen will be close and the
operation LED will blink, When LED stops blinking and the monitor
screen turns on, the charging is done. The FLASH ON function will
always fire the flash, the FLASH AUTO function will fireauto
-matically when required, When the shutter button is pressed,
the flash will fire.
press the shutter button again stops it.