Nikon AF Nikkor 18mm f/ 2.8 D Lens Manuel D'Instructions
JAA80351-R.3739.A
- ・AF-S DX 8-55/3.5-5.6G VR -
Caution:
When disassembling/(re)assembling, be sure to use the conductive mat (J5033) and wrist strap
(J5033-5) for static protection of electrical parts.
When disassembling, make sure to memorize the processing state of wires, screws to be fixed and
their types, etc.
Because prototypes are used for "1. Disassembly" and "2. Assembly/Adjustment", they may differ
from the actual products in forms, etc.
Because pictures are processed by a special method, they may differ from the actual ones in texture.
(J5033-5) for static protection of electrical parts.
When disassembling, make sure to memorize the processing state of wires, screws to be fixed and
their types, etc.
Because prototypes are used for "1. Disassembly" and "2. Assembly/Adjustment", they may differ
from the actual products in forms, etc.
Because pictures are processed by a special method, they may differ from the actual ones in texture.
�
�
�
�
This lens will require optical lens alignment after assembly, in case the 4th lens-group unit is removed.
At repair service facilities, therefore, where this alignment work can not be performed, do NOT remove the
4th lens-group unit.
At repair service facilities, therefore, where this alignment work can not be performed, do NOT remove the
4th lens-group unit.
This lens also has the VR (vibration-reduction) unit mounted in order to correct camera shake.
To keep the accuracy of this function for stabilizing the image, in case the gyro FPC, main PCB, or the
the
fixed tube unit (VR unit) is replaced, be sure t�� �a�e t�e VR ad�ust�ent b�� usin�� t�e VR lens ad�ust�ent
be sure t�� �a�e t�e VR ad�ust�ent b�� usin�� t�e VR lens ad�ust�ent
equipment (J15380). H��wever, except f��r disasse�blin�� t�e ab��ve c���p��nents, t�e VR ad�ust�ent is NOT
necessar��, s�� at repair service facilities w�ere t�e "VR lens ad�ust�ent equip�ent" is n��t prepared, d�� NOT
disassemble NOR repair the products of the above cases.
necessar��, s�� at repair service facilities w�ere t�e "VR lens ad�ust�ent equip�ent" is n��t prepared, d�� NOT
disassemble NOR repair the products of the above cases.
・
Lead-free solder is used for this product.
・
For soldering work, the special solder and soldering iron are required.
・
D�� NOT �ix up lead-free s��lder wit� traditi��nal s��lder.
・
Use the special soldering iron respectively for lead-free solder and lead solder.
They cannot be used in common.
Points to notice for Lead-free solder products
※
Before Disassembly / Reassembly / Adjustment
INC