Pro-Ject Debut III/Phono USB 3081110199 Fascicule
Codes de produits
3081110199
Pro-Ject Audio Systems is a registered trademark of Heinz Lichtenegger
1050 Vienna · Margareten Road 98 · Tel. +43(0)15448580 · Fax. +43(0)15456697
www.project-audio.com · © Heinz Lichtenegger · Revision 15.10.10
Pro-Ject Debut III/Phono USB
Manual turntable with fitted cartridge
Ortofon OM 5E and
integrated MM phono pre-amplifier with
Ortofon OM 5E and
integrated MM phono pre-amplifier with
A/D converter and USB output
Turntable
Chassis available in matt black, glossy black, silver and glossy white
Product information
A quiet running AC motor with a two-step pulley drives the hub and platter via a flat-ground belt.
The medium density fibre plinth stands on four feet which act as shock absorbers.
The motor is decoupled from the plinth to reduce vibration transmission.
The platter is a sandwich construction utilising the hub, a sheet-steel platter weighing 1,3Kg and a felt mat.
The platter's low-tolerance chrome-plated stainless-steel axle runs on a polished ball bearing in a brass
bearing housing.
bearing housing.
External power supply avoids potential electro-mechanical interference.
Tonearm Pro-Ject 8.6
The turntable is supplied with Ortofon OM 5E MM-cartridge fitted.
Uniform material: the tonearm tube and bearing housing are constructed from aluminium.
The headshell and undamped armtube are fashioned from a single piece.
The inverted horizontal bearings consist of two hardened stainless steel points bearing in sapphire cushes.
Flexible counterweight shaft avoids vibration at undesirable frequencies.
Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell.
The internal wiring consists of flexible high-purity copper from the headshell right through to the gold-plated
phono sockets.
phono sockets.
A supplied 3,5 mm connector can be used to connect your Pro-Ject Debut III/Phono to any line level/auxiliary
input (Computer, Midi System, Mixer etc.).
Dimensions W x H x D: With dust cover closed 415 x 118 x 320mm, dust cover open 415 x 365 x 405mm.
Phono Pre-amplifier
Optimal channel separation through dual-mono circuitry
Digitalisation of analogue signals for recording direct to disk via USB with suitable recording programs
Runs on Windows XP
®
, Windows Vista
®
, Windows 7
®
and Mac OS operating systems
Technical specifications Phono Pre-amplifier - A/D converter
Noise floor:
88dB
THD: 0,005%
Input impedance:
Input impedance:
47kohms/100pF
Power consumption:
16V/40mA AC
Gain: 32dB
Output voltage typically:
160mV/1kHz at 4mV/1kHz
RIAA-equalisation curve accuracy:
> 0,5dB/20Hz - 20kHz
USB output:
digital serial data protocol USB 1.1
The manufacturer reserves the right to alter the technical specifications without notice.
!
The unit may only be connected to a line level input.