Exegin Technologies Limited Q53 Manuel D’Utilisation

20

Q53 Installation and Configuration Guide © Exegin Technologies Limited, 2009

iv. Configuration Tools
TCP/IP Commands

To install Gecko on a Windows workstation, you will need to:

1. Insert the Q53 CD ROM and bring up the CD directory listing in My Computer or 

Windows Explorer

2. Double click on setupex.exe in the Gecko directory to run the InstallShield Wizard.

3. Answer the prompts throughout the Wizard. 

Once the install process is complete, you will be prompted to view the ReadMe file. 
Select "Yes" to read this and when done, close the file.

Note: The latest version of Gecko is available on Exegin’s website: 
http://www.exegin.com/.

Telnet can be used to access a remote computer on a network. To use this command, you 
must know the IP address of the Q53 ZigBee / 802.15.4 Gateway Bridge. You can start 
a Telnet session on a UNIX- or Windows-based computer which is connected to the 
network, to log in to the Q53 command line interface shell to alter and view settings. 

Syntax: 

Example:

This will bring up the Q53 login prompt. Enter "

" for the User ID and press either 

ENTER at the password prompt or, if a password has been set, then type it in and press 
ENTER.

You can use the "

" command to check that an assigned IP address (for example, the 

IP address for the Q53) is active.

Syntax:

For example:

The response will indicate whether the IP address is active or not.