Exegin Technologies Limited Q53 Manuel D’Utilisation
59
Q53 Installation and Configuration Guide © Exegin Technologies Limited, 2009
viii. Reference Information
Complete Command Reference
Complete Command Reference
Complete Command Reference
This section outlines the entire Q53 command set including the command syntax, a
description, and in most cases, an example for each command listed. These commands
are available in the command line interface shell. See
description, and in most cases, an example for each command listed. These commands
are available in the command line interface shell. See
on page 57 for information on accessing these commands
•
•
•
•
store net mask netmask
Store the subnet mask for the Q53.
store net gateway
routerIPaddress
Store a default router/gateway for the Q53 to
forward remote packets to.
forward remote packets to.
store net opts [[-]dhcp]
Enable or disable DHCP requests for IP
addresses.
addresses.
list net
List the current TCP/IP network settings.
list sysinfo
List current system information for the Q53.
save
Save all current settings to Flash.
reset
Reset the Q53.
ping IPaddress
"
ping
" another TCP/IP host on the network.
quit
"Quit" out of the command line interface
shell.
shell.
Table 3—Common Commands
Command Syntax
Description