Exegin Technologies Limited Q53 Manuel D’Utilisation
77
Q53 Installation and Configuration Guide © Exegin Technologies Limited, 2009
xi. Q53 Specifications
Q53 LEDs
Q53 LEDs
Figure 29—Antenna Radiation Pattern
Q53 LEDs
STAT
System Status
NET
Data to Ethernet
RF
Data to Zigbee PAN
Run and
auto-reset
mode
auto-reset
mode
Run Mode is the normal operating state of the Q53. Auto-reset mode is entered when the
watchdog timer is triggered and the Zigbee gateway bridge device has reset itself. The
STAT LED flashes differently depending on whether the device’s IP address is
configured.
watchdog timer is triggered and the Zigbee gateway bridge device has reset itself. The
STAT LED flashes differently depending on whether the device’s IP address is
configured.
Azimuth
Elevation
-50.0
-40.0
-30.0
-20.0
-10.0
0.0
-45.0
-35.0
-25.0
-15.0
-5.0
5.0
Table 8—STAT LED Patterns
FLASH RATE
INDICATES
Green, on once per second
(i.e., more off than on)
(i.e., more off than on)
Normal Mode, IP address configured
Green, on twice per second
IP address not configured
Amber, off once per second
(i.e., more on than off)
(i.e., more on than off)
Download (MOS)
Amber, off twice per second
Download (MOS), no IP address configured
Red, off twice per second
System error