Bandspeed Inc. 3100AGV2 Manuel D’Utilisation
- 30 -
Configuring BSP1000 Using the Serial Port
Should the BSP1000 become inaccessible over the network (ethernet or wireless), you
may need to configure it using the serial interface.
Connect a null-modem cable from an industry-standard PC to the serial port on the back
of the BSP1000.
Configure the serial interface according to the Serial Port information in Important
Factory Defaults. Use a serial interface program such as TeraTerm to configure the
serial interface, usually COM1.
may need to configure it using the serial interface.
Connect a null-modem cable from an industry-standard PC to the serial port on the back
of the BSP1000.
Configure the serial interface according to the Serial Port information in Important
Factory Defaults. Use a serial interface program such as TeraTerm to configure the
serial interface, usually COM1.
After configuring the serial interface, press <Enter> on the PC keyboard and you will be
presented with the BSP1000 login prompt (below).