Thunder Tiger Corp. TT-FHM2P4G-A14 Manuel D’Utilisation
Default
NOR
Adjusting Range
NOR/REV
Default
H 0
Adjusting Range
L125~H125
Default
R 0
Adjusting Range
L125~R125
15
6. Model Number
10 models can be saved in the radio memory code (Model 0~9). The Model No.
flashes on the display. Use up(+)/down(-) buttons to call the model you want to
select. When turning the transmitter on, the last model will be re-called on the
model icon. Any amendments done on a particular model No. are automatically
saved.
7. SUB-T (Sub trim)
ST (Steering)
TH (Throttle)
The SUB-T(sub trim) function allows the minor
adjustments of the neutral point on the steering and
throttle servos. Use the “up”(+) and “down”(-) buttons
to adjust. Under the SUB-T/ST mode, use the “up”(+)
button to increase the movement of the steering
servo neutral point toward right side and use the
“down”(-) button to adjust toward left side. Default
value is “R0” on the display. If the adjusting is to the
left side and over the default neutral point, then the
“R” will be changed to “L”.
SUB-T/TH mode adjusts the throttle servo. Proceed
as the SUB-T/TH, note that R/L (right/left) have now
changed to H/L (high/low).
8. REV (reverse)
The REV (reverse) function reverses the direction of
the servos relative to transmitter input. Enter this mode,
the “NOR”(normal) or “REV”(reverse) are displayed on
the display and can be switched by pressing the “up”(+)
or “down”(-) buttons to change direction. For each
individual servo (steering, throttle & AUX) direction can
be changed.
Default
Model 0
Adjusting Range
Model 0~9
2.4GHz Digital Radio System