Holley Group Co. Ltd. HZME3A Manuel D’Utilisation
Holley 1mW ZigBee Module Manual (V1.0.0)
13 2009.09.30
Appendix C: Agency Certifications
FCC Certification
This equipment complies with Part 15 of the FCC rules and regulations.
To fulfill FCC Certification requirements, an OEM manufacturer must comply with the
following regulations:
1. The modular transmitter must be labeled with its own FCC ID number, and, if the FCC ID
is not visible when the module is installed inside another device, then the outside of the
device into which the module is installed must also display a label referring to the enclosed
module. This exterior label can use wording such as the following:
This equipment complies with Part 15 of the FCC rules and regulations.
To fulfill FCC Certification requirements, an OEM manufacturer must comply with the
following regulations:
1. The modular transmitter must be labeled with its own FCC ID number, and, if the FCC ID
is not visible when the module is installed inside another device, then the outside of the
device into which the module is installed must also display a label referring to the enclosed
module. This exterior label can use wording such as the following:
Example of label required for OEM product containing
HT-MDL-Z-EM-2400-001-A-V3.0.0 module
Any similar wording that expresses the same meaning may be used.
2.
2.
To be used with the HT-MDL-Z-EM-2400-001-A-V3.0.0 module, the external antennas
have been tested and approved which are specified in Approved Antenna List. The
HT-MDL-Z-EM-2400-001-A-V3.0.0 module may be integrated with other custom design
antennas which OEM installer must authorize following the FCC 15.21 requirements.
HT-MDL-Z-EM-2400-001-A-V3.0.0 module may be integrated with other custom design
antennas which OEM installer must authorize following the FCC 15.21 requirements.
WARNING:
The Original Equipment Manufacturer (OEM) must ensure that the OEM
modular transmitter must be labeled with its own FCC ID number. This includes a clearly
visible label on the outside of the final product enclosure that displays the contents shown
below. If the FCC ID is not visible when the equipment is installed inside another device,
then the outside of the device into which the equipment is installed must also display a
label referring to the enclosed equipment.
visible label on the outside of the final product enclosure that displays the contents shown
below. If the FCC ID is not visible when the equipment is installed inside another device,
then the outside of the device into which the equipment is installed must also display a
label referring to the enclosed equipment.
IMPORTANT:
This equipment complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause
undesired operation (FCC 15.19).
The internal/external antenna(s) used for this mobile transmitter must provide a separation
distance of at least 20 cm from all persons and must not be co-located or operating in
conjunction with any other antenna or transmitter.
this device must accept any interference received, including interference that may cause
undesired operation (FCC 15.19).
The internal/external antenna(s) used for this mobile transmitter must provide a separation
distance of at least 20 cm from all persons and must not be co-located or operating in
conjunction with any other antenna or transmitter.
IMPORTANT:
Modifications not expressly approved by this company could void the user's
authority to operate this equipment (FCC section 15.21).
For a Class B digital device or peripheral, the instructions furnished the user shall include
the following or similar statement, placed in a prominent location in the text of the manual:
For a Class B digital device or peripheral, the instructions furnished the user shall include
the following or similar statement, placed in a prominent location in the text of the manual:
NOTE:
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
Contains FCC ID: VQMHZME3A
The enclosed device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
The enclosed device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.