Shenzhen Sang Fei Consumer Communications Co. Ltd. CTX520 Manuel D’Utilisation
10
Getting Started
Use quality batteries to ensure that the battery
can be correctly detected by your phone. Your
phone is by-packed with an Energizer Lithium
AAA battery to provide you with maximum
power.
can be correctly detected by your phone. Your
phone is by-packed with an Energizer Lithium
AAA battery to provide you with maximum
power.
Insert an AAA battery
1.
1.
A key comes with the supplied phone strap.
Use the key to loosen the AAA battery cap on
the smartcavity
Use the key to loosen the AAA battery cap on
the smartcavity
TM
.
2. Take off the battery cap by hand, put in the
battery and tighten the cap by hand again.
Tighten the battery cap by hand. Stop
tightening the cap when it is secure (at the
groove).
tightening the cap when it is secure (at the
groove).
When an AAA battery is inserted, the AAA
battery cap cannot be pushed inside
completely. There will be a protrusion at
around 5mm.
battery cap cannot be pushed inside
completely. There will be a protrusion at
around 5mm.
Remove the AAA battery if you will not use it
for power transfer for a long time.
for power transfer for a long time.
Charge your phone using the AAA battery
1.
1.
Check that the AAA battery has sufficient
power (the right battery symbol is not in red).
power (the right battery symbol is not in red).
2. Automatic charging:
• If the main battery is low, the AAA battery in the
• If the main battery is low, the AAA battery in the
smartcavity™ will charge the main battery
automatically. The message “Transferring” is
displayed.
automatically. The message “Transferring” is
displayed.
Manual charging:
• Select
• Select
Settings
>
Transfer backpower
to start
charging.
• Select
Stop transferring backpower
to stop
charging.
When the main battery voltage reaches 4.0V, the
When the main battery voltage reaches 4.0V, the
X520_Master_EN.book Page 10 Tuesday, October 14, 2008 2:04 PM