Shenzhen Sang Fei Consumer Communications Co. Ltd. CTX520 Manuel D’Utilisation
Calling
13
2. Calling
This chapter describes the features and options
related to making and receiving calls.
related to making and receiving calls.
Switch on the phone
Long press ) to switch on the phone.
You may set a security code (PIN code) on your
phone to protect it from unauthorized use. If you
have set a security code, you will be prompted to
enter the corresponding security code when you
switched on the phone.
1. Enter the PIN code. If you have entered the
You may set a security code (PIN code) on your
phone to protect it from unauthorized use. If you
have set a security code, you will be prompted to
enter the corresponding security code when you
switched on the phone.
1. Enter the PIN code. If you have entered the
wrong number, press R
Clear
to clear it.
2. Press ,. The phone will validate the PIN code
and commence network registration.
3. Once a network name is displayed on the
screen, you are ready to make or answer a call.
If there is no network name on the screen, you
need to re-register.
If there is no network name on the screen, you
need to re-register.
If you enter a wrong PIN code 3 times in
succession, your SIM card will be blocked. To
unblock it, you must request the PUK code from
your operator. If you enter a wrong PUK code
10 times in succession, your SIM card will be
permanently blocked and cannot be used
succession, your SIM card will be blocked. To
unblock it, you must request the PUK code from
your operator. If you enter a wrong PUK code
10 times in succession, your SIM card will be
permanently blocked and cannot be used
anymore. If this happens, please contact your
network operator.
network operator.
Switch off the phone
At all times, you can long press ) to switch off the
phone.
phone.
Make a call
You can make a call only when the network
name appears on the screen.
name appears on the screen.
1. Enter the phone number.
2. Press ( to dial the number or press L
2. Press ( to dial the number or press L
Options
to enter options menu, then select
Dial
.
Speed dial
On the idle screen, you can call a contact in your
phonebook by long pressing a numeric key. To
assign a speed dial key to a contact:
1.
phonebook by long pressing a numeric key. To
assign a speed dial key to a contact:
1.
Go to
Settings
>
General
>
Speed dial
.
2.
Select one of the locations (2 to 9).
3. Assign to the location a contact from your
phonebook.
X520_Master_EN.book Page 13 Tuesday, October 14, 2008 2:04 PM