IDP Corp. Ltd. SMARTDUAL Manuel D’Utilisation
XYG
2.1.8. Install the ribbon cartridge to
the printer after install
the ribbon and cleaning roller
to the cartridge.
to the cartridge.
2.1.9. Close the top cover until it
clicks.
If it is not closed, check
the installation state of
the ribbon cartridge.
the ribbon cartridge.
2.2. Loading Cards
This section shows how to load plastic cards into the Smart Printer.
2.2.1. If the card hopper cover is closed, open it.
2.2.2. Adjust the card thickness with
control lever.
(Caution! If the adjustment is not correct, it will
make some errors. Use the type of cards
make some errors. Use the type of cards
appearing in the specification in this manual.
Always keep cards surface clean.)
<Figure 11> Install the ribbon cartridge
<Figure 12> Close Top Cover
<Figure 13> Adjust the card thickness