Visonic Ltd. NEXTCAMPG2 Manuel D’Utilisation
D-302893
1
NEXT CAM PG2,
NEXT CAM-K9 PG2
Wireless, PowerG, PIR / Pet Immune Detectors with
Integrated Camera
Integrated Camera
Installation Instructions
1. INTRODUCTION
The Next CAM PG2 is a 2-way, microprocessor-controlled,
wireless digital PIR detector with integrated camera and
microphone for alarm verification.
The PIR detector's features are as follows:
Combined Fresnel and cylindrical optics, up to 12 meters (40 ft).
The Next CAM PG2 includes wall creep zone protection.
For pet immune version - Target Specific Imaging™ (TSI)
wireless digital PIR detector with integrated camera and
microphone for alarm verification.
The PIR detector's features are as follows:
Combined Fresnel and cylindrical optics, up to 12 meters (40 ft).
The Next CAM PG2 includes wall creep zone protection.
For pet immune version - Target Specific Imaging™ (TSI)
technology is used for distinction between human beings and
pets weighing up to 38 kg (85lb).
pets weighing up to 38 kg (85lb).
Includes a fully supervised PowerG transceiver.
The advanced True Motion Recognition™ algorithm (patented)
The advanced True Motion Recognition™ algorithm (patented)
allows distinguishing between the true motion of an intruder and
any other disturbances which may cause false alarms.
any other disturbances which may cause false alarms.
No vertical adjustment is needed.
Motion event counter determines whether 1 or 2 consecutive
Motion event counter determines whether 1 or 2 consecutive
motion events will trigger an alarm.
Automatic termination of walk-test after 15 minutes.
Microprocessor-controlled temperature compensation.
Sealed chamber protects the optical system.
Front cover and back tamper, for improved tamper protection.
White light protection.
Battery compartment
The camera's features are as follows:
Day and night CMOS camera, with IR illumination. This allows
Microprocessor-controlled temperature compensation.
Sealed chamber protects the optical system.
Front cover and back tamper, for improved tamper protection.
White light protection.
Battery compartment
The camera's features are as follows:
Day and night CMOS camera, with IR illumination. This allows
taking pictures in full darkness without letting the intruder know.
Camera range: 12 m (40ft). With IR illumination 10m (33 ft).
Picture format and resolution: JPEG, QVGA (320x240 pixels).
Frame rate: up to 3 fps (for user).
Audio format: ADPCM, 4bit / 2bit.
Picture format and resolution: JPEG, QVGA (320x240 pixels).
Frame rate: up to 3 fps (for user).
Audio format: ADPCM, 4bit / 2bit.
Camera operation modes:
o
Post alarm – pictures are taken after detection by
detector.
detector.
o
On demand – pictures are taken after a command from
the monitoring station.
the monitoring station.
B
A
C
D
E
A. Microphone
B. Camera lens
C. IR LED
D. Light sensor
E. LEDs
Fig. 1. External View
2. SPECIFICATIONS
GENERAL
Detector Type: Dual element low-noise pyroelectric sensor
Lens Data: No. of Curtain Beams / curtains:
Next CAM PG2: 18 far, 18 mid, 10 close.
Next CAM-K9 PG2: 18 far, 18 mid, 18 close.
Max. Coverage: 12 x 12 m, (40 x 40 ft) / 90°
Pet Immunity (Next CAM-K9 PG2 only): Up to 38 kg (85 lb).
ELECTRICAL
Internal Battery
Detector Type: Dual element low-noise pyroelectric sensor
Lens Data: No. of Curtain Beams / curtains:
Next CAM PG2: 18 far, 18 mid, 10 close.
Next CAM-K9 PG2: 18 far, 18 mid, 18 close.
Max. Coverage: 12 x 12 m, (40 x 40 ft) / 90°
Pet Immunity (Next CAM-K9 PG2 only): Up to 38 kg (85 lb).
ELECTRICAL
Internal Battery
:
6V Lithium battery (two CR-123A 3V batteries
or two CR17450 3V batteries, in series) or equivalent.
Note: For UL installations use Panasonic, Sanyo, GP or Varta
only. Use only the above battery. Dispose of used battery
according to the manufacturer's instructions.
Nominal Battery Capacity: 6V 1450 mA/h (2xCR123A), 2200
mA/h (2xCR17450)
Battery Life (for typical use): 3 or 5 years depending on battery
pack type (and camera version)
Optional MAINS supply: Additional to batteries, 7.5 V DC.
Power Supply: Type C
Note: For UL installations use Panasonic, Sanyo, GP or Varta
only. Use only the above battery. Dispose of used battery
according to the manufacturer's instructions.
Nominal Battery Capacity: 6V 1450 mA/h (2xCR123A), 2200
mA/h (2xCR17450)
Battery Life (for typical use): 3 or 5 years depending on battery
pack type (and camera version)
Optional MAINS supply: Additional to batteries, 7.5 V DC.
Power Supply: Type C
FUNCTIONAL
True Motion Event Verification: 2 remote selections - 1 (OFF)
or 2 (ON) motion events
True Motion Event Verification: 2 remote selections - 1 (OFF)
or 2 (ON) motion events
Alarm Period: 2 seconds
3
6
12 m
0
10
20
30
40 ft
9
0
3 (10ft)
6 (20ft)
9 (30ft)
3 (10ft)
6 (20ft)
9 (30ft)
90°
3
6
9
12 m
0
2.4 m
(8 ft)
(8 ft)
10
20
30
40 ft
B
A
C
A. TOP VIEW
B. SIDE VIEW
C. Next CAM PG2: 0.5-4m, Next CAM -K9 PG2: 2-4m
Fig. 2. Coverage Pattern & Walk-test