ooma TELOHS500 Manuel D’Utilisation

 

Displays whether the 

microphone is muted

 

Displays when you have 

missed calls to review

 

Displays when the ringer 

volume is turned off  

(this phone will not ring)

 

Displays when Do Not 

Disturb mode is enabled  

(no phones will ring)

 

Signal bars show the connection 

strength to the Ooma Telo

 

Shows the battery charge level.  

A lightning bolt will flash when  

the batteries are charging

 

Shows which line or lines are 

currently in use

Shows whether the speakerphone 

functionality is engaged

 

Displays when you have 

established an HD-quality call

WARNING: 

If you need to replace 

the batteries included with your 

handset, use only rechargeable 

Nickel Metal-Hydride (Ni-MH)

batteries. Other types of batteries may 

damage the handset or create a risk of fire.

We recommend that you leave the 

handset on the cradle for 30 minutes 

before proceeding to the next step. 

The handset requires 10 hours to  

fully charge.

You’re just a few quick steps from making and receiving calls on your 

new Ooma HD3 Handset. This handset is the perfect companion to 

the Ooma Telo™—you’ll be able to access all Ooma features and 

even unlock new functionality! Before you begin, please make sure 

that your Ooma Telo is installed and operating properly, as your new 

handset cannot be set up without a functioning Telo. 

Remove the battery cover located on the 

back of the handset by sliding it away 

from the center of the device. Insert the 

two rechargeable AAA batteries, making 

sure that you align the flat end against 

the springs. Replace the battery cover by 

sliding it in the opposite direction.

Plug the AC adapter into a power outlet 

and then connect the AC adapter cable 

to the charging cradle. Put the handset 

on the cradle. 
When the handset is on its cradle, it will 

show a lightning bolt in the battery icon 

when it is charging.

Press the Page key on your Ooma Telo 

and hold it down for three seconds to 

activate registration mode. When the 

handset detects the Telo, press the  

 soft key to proceed. 

Once the handset is successfully 

registered, the home screen will be 

displayed.
Each Ooma Telo supports up to four 

Ooma HD3 Handsets.

After the handset is registered to your Telo, it will display a home 

screen similar to the one pictured below.

Your Ooma HD3 Handset has an 

easy-to-use interface that puts 

the most common features at your 

fingertips while still letting you access 

all the advanced features the handset 

is capable of. 

Press the 

 

key from the  

home screen. 

Use the navigation pad to scroll 

through a menu until you have 

highlighted the item you want, then 

press the center Select key.

There are two context-sensitive soft 

keys just under the display. Shortcuts 

to popular functions are assigned to 

these keys. The handset will update 

the label above the keys as you use 

the phone. Press the appropriate soft 

key to invoke the assigned function.

To see a list of all available functions 

on a screen, press the Options  

soft key.

Press the 

 key to go back  

one menu level. Press   to exit  

all menus.

The following options are available from the main menu:

 — Listen to and 

manage your voicemail

 — Intercom to or 

monitor other handsets

 — Engage features 

like Do Not Disturb

 — Browse and 

search your contacts

 — Speed dial your 

friends and family

 — Access a list of  

your recent phone calls

 — Information about  

your Ooma system

 — Configure your  

phone preferences

Quick Start Guide

700-0174-100

Ooma-HD3-Handset-Black-QSG_ENG ONLY 2017-06-30.indd   3-6

6/30/17   12:35 PM