Bently Nevada Inc. 18531001 Manuel D’Utilisation
Section 4 - Commissioning Process
25
about 30 seconds, during which time the
IrDA converter needs to be held steady.
When complete the message next to the
node will change to Commissioned.
IrDA converter needs to be held steady.
When complete the message next to the
node will change to Commissioned.
8. When the last node is commissioned, close
the Essential Insight.mesh Utility.
When the wSIM or Repeater is commissioned to a
specific Manager Gateway, the nodes will appear in
that Manager Gateway's table. The node’s MAC
address, name and other information is stored in the
Manager Gateway's table.
specific Manager Gateway, the nodes will appear in
that Manager Gateway's table. The node’s MAC
address, name and other information is stored in the
Manager Gateway's table.
4.5 Verify Operation
wSIMs and Repeaters that have been successfully
commissioned into the network show up in the
Essential Insight.mesh Utility software in the left hand
pane with a status of Operational.
commissioned into the network show up in the
Essential Insight.mesh Utility software in the left hand
pane with a status of Operational.
The Admin Toolset software also shows the status of
commissioned wSIMs and Repeaters. On the
commissioned wSIMs and Repeaters. On the
Network menu, click Motes to view the status. After
all of the wSIMs and Repeaters have been
commissioned and are operational, the wireless
mesh network begins to form.
all of the wSIMs and Repeaters have been
commissioned and are operational, the wireless
mesh network begins to form.
NOTE
The network formation increases as network
reliability decreases. Some steps can be taken
to reduce the time for the network to form.
Keep the distance between nodes to 50M to
75M. Verify there are 3 other nodes within a
50M to 75M radius around the node. This will
ensure there are multiple paths for
communication to be established.